Unity 2m Single Phase Surface-Mounted Track - White

Description

Description
The Unity is a 2m single-phase surface-mounted track in white aluminium, designed to carry track spotlights across ceiling or wall runs without needing recessed installation. The track houses two copper conductors within a white powder-coated aluminium channel, delivering 220-240V AC power to compatible track heads via a rotary-locking connector system.

Intended for retail spaces, galleries, kitchens, home offices and living areas where adjustable directional lighting is needed, the 200cm length allows 3-5 track spotlights to be positioned along the run depending on spacing requirements. The track can be cut to shorter lengths on site if needed, or joined end-to-end with linking connectors (sold separately) to create longer continuous runs. Surface mounting means the track fixes directly to the ceiling or wall surface via screws into the back of the aluminium channel, eliminating the need for ceiling cut-outs or plasterboard patching.

The white powder-coated finish on the extruded aluminium provides a neutral appearance that recedes against white ceilings or pairs cleanly with pale walls. The 34mm width and 20mm depth give the track a slim profile that projects minimally from the mounting surface. The IP20 rating suits dry indoor environments; the track is not suitable for bathrooms, outdoor installations or locations where moisture or dust ingress is likely.

Specification

Height
2cm

Length
200cm

Width
3.4cm

Finish
White

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What track spotlights fit this rail?

The Unity track uses a standard single-phase connector system compatible with most track spotlights designed for surface-mounted single-phase rails. Check that the spotlight's connector matches the single-phase specification before purchasing.

Can the track be cut to a shorter length?

Yes. The aluminium channel can be cut with a hacksaw or mitre saw to fit smaller spaces. The live feed can be repositioned internally after cutting, but this should be done by a qualified electrician to ensure safe power connection.

How is the track mounted?

The track fixes to the ceiling or wall using screws driven through pre-drilled holes in the back of the aluminium channel. The mounting surface must be solid enough to support the combined weight of the track and the spotlights it will carry.

Can multiple tracks be joined together?

Yes. Linking connectors (sold separately) allow multiple 2m sections to be joined end-to-end to create longer continuous runs. The linking connector maintains electrical continuity between sections.