Stark Fixed Round Recessed Downlight IP65 - White
Original price was: kr230.kr94Current price is: kr94. Inklusive moms
Frakt och leverans
30 dagars gratis returer
Description
Description
Description
The Stark is an 84mm fixed round recessed downlight with an IP65-rated white aluminium trim and a GU10 bulb holder. The fitting sits 29mm deep once installed into a ceiling void, with the white bezel sitting flush against the ceiling surface. The IP65 rating protects the internal components from dust ingress and water jets from any direction, making the fitting suitable for bathrooms, shower rooms, covered outdoor soffits, and commercial washrooms where moisture resistance is required.
Designed for fixed-beam task and accent lighting, the Stark works in low-ceiling spaces where adjustable downlights would protrude too far, and in exterior soffits where the fitting needs to withstand rain exposure from underneath. The GU10 bulb fitting accepts standard UK mains-voltage LED, halogen or CFL bulbs up to 50W (sold separately), giving control over colour temperature and beam angle depending on the chosen bulb. Most users pair this with a 5-7W GU10 LED in 3000K or 4000K for bathroom or kitchen task lighting.
The white powder-coated aluminium trim provides corrosion resistance in damp environments and blends into white or light-coloured ceilings without visual contrast. The round bezel measures 84mm outer diameter, requiring a ceiling cut-out of approximately 68mm, and the fitting weighs under 100g once the bulb is removed. Spring clips on either side of the housing hold the downlight securely in plasterboard or timber ceilings between 10-25mm thick without additional fixings.
Specification
Height
2.9cm
Diameter
8.4cm
Finish
White
Construction
Aluminium
IP Rating
IP65
Voltage
AC 220-240
Bulb Base
GU10
Wattage
50
Warranty
2 Year Guarantee
Downloads
Product Manual
Frequently Asked
Can this be used in a bathroom shower area?
Yes. The IP65 rating protects against water jets from any direction, making the Stark suitable for installation directly above showers and baths in Zone 1 and Zone 2 of UK bathroom regulations. Pair with a suitable GU10 LED bulb and ensure all electrical work is completed by a qualified electrician.
What bulb does it take?
The fitting takes a standard GU10 mains-voltage bulb up to 50W maximum. Bulbs are sold separately. Most users choose a 5-7W GU10 LED in 3000K for warm white or 4000K for neutral white task lighting in bathrooms and kitchens.
What ceiling cut-out size is needed?
The outer bezel measures 84mm diameter and requires a ceiling cut-out of approximately 68mm. The fitting sits 29mm deep into the ceiling void once installed, so a minimum void depth of 40mm is recommended to allow for the bulb length and wiring space.
Is the beam direction adjustable?
No. The Stark is a fixed downlight, meaning the beam direction is locked vertically downwards. For adjustable beam direction, see the tiltable downlight models in the Maytoni range at Niori.
Bygg ditt paket




