E14 Socket Ring Lampholder E14 - White

Description

Description
The E14 Socket Ring Lampholder E14 is the part a lamp screws into, made up on the flex of a pendant or wired into a lamp. A white moulded lampholder with a broad threaded skirt and a separate shade ring that drops over it, shown lifted clear so the thread beneath shows. The body is a stepped cylinder with shallow ribs round its shoulder and a plain cord entry standing up from the top. The shade ring is a flat collar with a turned lip, sized to trap a shade against the holder. Everything is one flat white with a slight sheen to the plastic. There is nothing decorative on it and no metal visible apart from the lamp contacts.

It is the part everything else is built around: a shade goes over it, a flex runs into it, and the lamp you choose sets how the light reads. It is a part rather than a finished fitting, so it is bought alongside whatever it is going to carry or connect to rather than on its own. That is the point of buying the pieces separately: the shade, the flex and the holder are each chosen on their own, and a run can be made up to a length and a drop that no finished pendant would give you.

The holder is E14 and takes up to 40W. It wires into a fixed outlet at a terminal block, which is work for a competent electrician. It is class II, double insulated, so it needs no earth, and it is rated IP20 for dry indoor rooms.

Specification

Finish
White

Maximum Wattage
40W

Light Source
E14 lamp, not included

Supply
230V

Insulation Class
Class II

IP Rating
IP20

Suitable Location
Indoor, dry rooms

Downloads
Instruction manual (PDF)

Frequently Asked
Which bulb does it take?
An E14 lamp up to 40W. Bulbs are supplied separately so you can choose the brightness and colour you want.

Can it be dimmed?
Yes, on a compatible dimmer, provided the lamp you fit is a dimmable one. The fitting has no dimmer of its own.

Does it need an electrician?
Yes. It wires into a fixed outlet at a terminal block.

Does it need an earth?
No. It is class II, double insulated, so it is wired live and neutral only.

Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.