Vesper 2 Light Up & Down Rotatable Wall Light - Gold & Black
Original price was: $147.$60Current price is: $60. شامل ضريبة القيمة المضافة
الشحن والتوصيل
إرجاع مجاني خلال 30 يومًا
Description
Description
Description
The Vesper is a double-cone wall light with two opposing E14 bulb fittings housed in matt black conical shades lined with gold leaf. Each cone rotates independently on a central brass joint, allowing the upward and downward light beams to be angled towards different wall surfaces, artwork or architectural
features. The wall plate and central connector are finished in polished brass.
Designed for hallways, bedrooms, living rooms and hotel corridor lighting, the Vesper casts two pools of warm reflected light onto opposing wall surfaces rather than direct light into a room. The gold lining inside each cone turns whatever bulb colour you install into warmer reflected light, while the matt black exterior absorbs ambient light and reduces the fitting's visual mass on the wall. The 18cm projection from the wall and 32cm overall height suit standard residential ceiling heights of 2.4-2.7m.
The rotatable cones are set on brass ball joints, allowing each shade to be angled up to approximately 45 degrees from vertical in any radial direction. This means the upper cone can be aimed at a ceiling corner while the lower cone highlights a skirting or floor surface, or both can be angled symmetrically to frame a centred artwork. The IP20 rating restricts the Vesper to dry indoor areas only — bathrooms and outdoor locations are not suitable.
Specification
Height
32cm
Length
32cm
Width
18cm
Finish
Gold
Construction
Metal
IP Rating
IP20
Voltage
AC 220-240
Bulb Base
E14
Wattage
40
Warranty
2 Year Guarantee
Downloads
Product Manual
Frequently Asked
What bulbs does the Vesper take?
The fitting takes two E14 small Edison screw bulbs, maximum 40W each. Bulbs are sold separately. Most users pair this with warm-white LED candle bulbs between 4-6W and 2700K to take advantage of the gold lining's reflective warmth.
Can the cones be adjusted after installation?
Yes. Each cone rotates on a brass ball joint and can be angled up to approximately 45 degrees from vertical in any radial direction. This allows you to direct the light beams towards different wall surfaces, ceilings or architectural features as needed.
Is the Vesper suitable for bathrooms?
No. The IP20 rating means the fitting is not protected against moisture and should only be installed in dry indoor areas. Bathrooms, wet rooms and outdoor locations are not suitable.
How far does the fitting project from the wall?
The Vesper projects 18cm from the wall when the cones are aligned vertically. When angled, the projection increases slightly depending on the rotation angle chosen.
أنشئ مجموعتك




