Valmontone LED Wall Light - Brushed Brass

Description

DescriptionThe Valmontone is a compact LED wall light in the shape of a neat cube, with an aluminium body in a brushed brass finish that shows a fine, straight grain across every face. It measures 10cm wide and 10cm tall and stands 10cm out from the wall, so it reads as a small, crisp block of metal rather than a bulky fitting. Inside are two integrated LEDs, one throwing light upwards and one downwards, each 1.5W and giving 200 lumens of warm white 3000K light. It is rated IP20, which settles where it belongs: indoors, in dry rooms.
Because the light leaves the top and bottom of the cube, it lays two soft fans of light on the wall rather than shining into the room. That makes it a good choice beside a bed, along a hallway or on a landing, wherever a gentle glow matters more than bright task lighting. A pair either side of a headboard gives each side of the bed its own warm wash of light, and a row along a corridor gives a plain wall a calm, even rhythm. The brushed brass sits comfortably beside dark furniture, pale walls and soft natural fabrics, adding a small note of warmth without taking over the room.
The LEDs are built in, so there is no bulb to buy or change. The light is not dimmable and has no switch of its own: it is switched at the wall, so a wall switch controls it. As a mains light that is wired in, it should be installed by a qualified electrician, and the installation instructions come as a PDF download. Packed, it weighs 0.341KG. One practical point: since the light lands on the wall both above and below the cube, settle on the mounting height before fitting so both pools fall where you want them.
Specification

Length
10cm

Height
10cm

Projection
10cm

Body Material
Aluminium

Body Colour
Brushed brass

Light Source
LED, integrated

Wattage
2 x 1.5W

Lumens
200lm per light (2 lights)

Colour Temperature
3000K

Dimmable
No

Switch
None (switched at the wall)

IP Rating
IP20

Protection Class
Class II

Voltage
220-240V, 50/60Hz

Energy Class
E

Weight (packed)
0.341KG

DownloadsInstallation Instructions (PDF)
Frequently AskedCan the Valmontone go in a bathroom or outside?
No. It is rated IP20, so it belongs indoors in dry rooms such as bedrooms, living rooms and hallways, and never in a bathroom or outside.
Which way does the light shine?
It shines both upwards and downwards from the top and bottom of the cube, with two LEDs each giving 200 lumens, so it washes the wall rather than the room.
Can the Valmontone be dimmed?
No, it is not dimmable. It has no switch of its own and is switched at the wall, giving the same warm white 3000K light at every use.
How big is the light?
It is a cube: 10cm wide, 10cm tall and 10cm deep from the wall, so it suits narrow walls and tight spots beside a bed.
Do I need to buy a bulb?
No. The light source is integrated LED, built into the fitting itself, so there is no separate bulb to buy or fit.
What material is the body?
The body is aluminium with a brushed brass finish, which gives the warm golden colour and the fine straight grain visible across each face.