Tomelle Downlight - White & Black

Description

DescriptionThe Tomelle is a round recessed downlight in white and black, with an aluminium body that sits flush into the ceiling. A white flange frames a slim black inner ring and a white reflector, so the fitting reads as a crisp, graphic circle against a pale ceiling. It measures 9.3cm across and takes a single GU10 bulb of up to 35W, which you buy separately because the bulb is not included. Its IP20 rating settles where it belongs: indoors, in dry rooms.
We would put it in the ceiling of a living room, a hallway, a bedroom or a study, anywhere you want light without a hanging shade. Because it takes a standard GU10 bulb, you choose the colour of light and the brightness yourself, and you can change your mind later with a simple bulb swap. The black ring is the detail that sets it apart from a plain white downlight: it gives each light a neat, defined edge, which works well in a run of several across a modern ceiling. There is no switch on the fitting itself, so it is controlled from your wall switch like any ceiling light.
Two spring clips hold the downlight in a cut-out of 6.8cm, and it needs a recess depth of 3.5cm above the ceiling, so check the void before you buy. It runs on 220-240V mains and weighs 0.167KG packed. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions come as a download. Planning a row of them? Measure the void at each position first, because the 3.5cm recess depth is the figure that decides where they can go.
Specification

Diameter
9.3cm

Body Material
Aluminium

Body Colour
White, black

Light Source
GU10 (bulb not included)

Wattage
Max 35W

Switch
None (switched at the wall)

IP Rating
IP20

Protection Class
Class II

Voltage
220-240V, 50/60Hz

Recess Depth
3.5cm

Cut-Out
6.8cm

Weight (packed)
0.167KG

DownloadsInstallation Instructions (PDF)
Frequently AskedCan the Tomelle downlight go in a bathroom?
We would keep it to dry rooms indoors. It is rated IP20, so it is not one for a bathroom or anywhere outdoors.
Which bulb does it take?
It takes one GU10 bulb of up to 35W. The bulb is not included, so you can pick the brightness and colour of light that suit the room.
What size of hole does it need?
It needs a cut-out of 6.8cm across and a recess depth of 3.5cm, and the visible flange measures 9.3cm across once it is fitted.
Is there a switch on the downlight?
No, there is no switch on the fitting itself. It is switched at the wall, just like a standard ceiling light in your home.
What material is the body?
The body is aluminium, finished in white with a black inner ring and a white reflector, which gives each light a clean, defined edge.