Sunset 31.5W LED Driver 14.5cm - White

Description

DescriptionThis is a slim, disc shaped driver in white, built to run LED fittings at a steady current rather than a fixed voltage. It handles loads of up to 30W and accepts both DALI and push dimming, so it can answer to an addressable control system or take its cue from an ordinary retractive switch. The body is shallow and very light in the hand, and the round profile keeps it neat wherever it needs to sit out of sight.
We would choose it for downlights and small recessed fittings that need smooth, quiet dimming rather than coarse steps, and it earns its keep in schemes where several circuits are brought under one control system. That makes it as useful in a house with scene control as it is in a shop, a study or a small office. It is intended for dry indoor positions only, kept away from damp and from anything that would trap heat around it.
The casing is finished in plain white, unbranded on the visible face and free of fussy detail, so it stays anonymous once installed. Looking after it asks very little: isolate the supply, then clear any dust from the housing and make sure nothing has been stacked or laid over it, since a driver wants air around it to stay happy. It carries a three year warranty. We stock it as part of the wider Sunset range, whose recessed bases come in black, gold and white across a run of sizes, so a whole scheme can be specified from one family of parts.
Specification

Colour
White

Weight
0.09KG

Diameter
145mm

Height
28mm

Materials Used
Aluminium

Lamp Cap
Not Applicable

LED Power
30W (±5%)

Type of Driver
Lifud

Constant Current Output
750mA

Min/Max. Voltage Output
9-42V

Load Range
30W

Total Power Consumption
30W (±5%)

IP Rating
IP20

Warranty
3yrs

UKCA/CE
Yes

Pieces Included
1

Installation
Requires Installation By Qualified Electrician

Country of Origin
China

Frequently AskedWhat size is the driver?
It measures 145mm across and 28mm high, and weighs 0.09kg, so it is a shallow round unit rather than a bulky brick.
How is it dimmed?
It supports DALI control and push dimming, so it will work on an addressable system or from a retractive wall switch.
What load will it take?
It is rated for LED loads of up to 30W. Add up the wattage of the fittings on the circuit and keep the total within that figure.
Is it suitable for a bathroom or outdoors?
No. It is rated IP20, which means dry indoor positions only, protected from moisture and splashing.
Does it come with a warranty?
Yes, it carries a three year warranty from the manufacturer.
How should I clean it?
Switch off at the consumer unit first, then lift away dust with a dry brush or cloth. Keep it uncovered so air can move around the housing.