Blow Outdoor LED Wall Light - Graphite

Description

Description
The Blow is a 10cm wide outdoor LED wall light with a curved graphite aluminium shell and a frosted glass diffuser underneath. An integrated 5W LED running at 3000K casts warm white light downwards onto the wall surface below, creating a wash effect that highlights texture in brickwork, rendering or cladding without spilling glare into sightlines.

Designed for residential porches, side entrances, balconies and pathways, the Blow provides accent and wayfinding light rather than full-flood illumination. The compact 6.4cm height and 11cm projection from the wall mean it sits comfortably on narrow facades, gate posts and garage surrounds where larger fittings would overwhelm the architecture. The IP54 rating protects against dust ingress and water spray from any direction, making it suitable for exposed positions under eaves or on open balconies.

The aluminium housing is powder-coated in a mid-grey graphite finish that sits between charcoal and anthracite on the tone scale, pairing comfortably with dark grey cladding, slate tiles, black window frames and zinc guttering. The frosted glass diffuser softens the LED point source and prevents harsh shadows on the wall below. The wide 100-240V AC input range allows installation across international voltage standards without requiring a transformer.

Specification

Height
6.4cm

Length
10cm

Width
11cm

Finish
Graphite

Construction
Aluminium & Glass

IP Rating
IP54

Voltage
AC 100-240

Wattage
5

Colour Temperature
3000K

Warranty
3 Year Guarantee

Downloads
Product Manual

Frequently Asked
What does IP54 mean for outdoor use?

IP54 provides protection against dust ingress and water spray from any direction. The Blow is suitable for covered porches, balconies under eaves, and open pathways, but is not rated for full submersion or direct high-pressure water jets.

Does the light shine upwards or downwards?

The Blow casts light downwards only, washing the wall surface below the fitting. This creates accent lighting and highlights wall texture without glare into windows or sightlines above.

Is the LED replaceable?

The 5W LED is integrated into the fitting and is not user-replaceable. LED lifespan is typically 25,000-50,000 hours depending on operating conditions, which equates to 10-20 years of typical residential use.

What mounting surface is required?

The Blow mounts to solid brick, masonry, timber cladding or rendered walls using the back plate and fixings supplied. The fitting must be wired into a suitable outdoor-rated junction box or cable run complying with UK wiring regulations.