Zero LED Track Light 10W 2700K - Brass

Description

DescriptionWe stock the Zero as a 10W LED track light in brass, made for soft ambient light rather than a focused beam. A cylindrical brass column carries a circular frosted diffuser ring, and the integrated LED inside throws 550 lumens of warm white (2700K) light out through that ring across a full 360 degree spread. The frosted diffuser softens the output and cuts glare, so the fitting gives a gentle, even glow rather than a hard spot.

It suits retail spaces, galleries, hospitality settings and home kitchens where you want general ambient light along a track rather than tight accents. The 360 degree spread pushes light evenly all around the fitting, which works well when several are spaced along a run to light a room as a whole. The 90 CRI rating keeps colours accurate, and the brass finish adds a warm metallic note that sits comfortably with both traditional and contemporary interiors.

The Zero runs on a 24V DC track system and can be repositioned along the track as your layout changes. The brass finish is applied over an aluminium body, so the fitting stays light, and the integrated 10W LED means there is no separate bulb to buy or replace. It is not dimmable in itself, so any dimming has to be handled at the driver. It is rated IP20 for dry indoor use only, so keep it away from moisture.

Specification

Wattage
10 W

Lumens
550 Lm

Colour temperature
2700 K

IP rating
IP 20

Beam angle
360°

CRI
90 CRI

Voltage
DC 24 V

Dimmable
No

Material
Aluminium

Finish
Brass

Downloads
Energy label

Frequently AskedDoes it give a spot or a wash?

A wash. The frosted ring and 360 degree spread give soft, even ambient light all around the fitting, which is why the Zero suits general room lighting rather than tight accent spotlighting.

Does it need a separate bulb?

No. The 10W LED is integrated into the fitting, giving 550 lumens of warm white 2700K light, so there is no separate bulb to buy or replace over its life.

Is it dimmable?

No, the Zero is non-dimmable. If you want to dim a track run, that has to be handled at the driver or with a compatible dimmable driver rather than at the fitting itself.

Is it suitable for a bathroom?

No. It is rated IP20 for dry indoor use only, so keep it to rooms away from moisture such as retail spaces, galleries, kitchens and hospitality areas rather than bathrooms.