Viora Surface Magnetic Track L-Connector - White

Description

DescriptionThis white L-connector joins two lengths of the Viora surface magnetic track at a right angle, so a run of light can turn a corner instead of stopping short. It is 68mm long, 68mm wide and only 13.5mm high, with a joining tab at each end for the two meeting lengths of track. You receive the connector alone. The track and the track lights are not included and are bought separately, so plan the whole layout before you order. In plain white, it reads as part of the track rather than as a separate piece.
We suggest it wherever a straight run of track is not enough: following the line of a room around a corner, framing a dining area or tracing an L-shaped room so the lights can sit exactly where they are needed. Because the track continues around the turn, you can place lights along both arms of the corner from one continuous system rather than fitting two separate runs that end apart. The maker specifies one kit for each corner connection, so count the corners in your plan and order one connector for every one of them. Surface mounting means the track and this connector sit on the surface rather than being recessed, so there is no need to cut into plaster.
The connector weighs just 0.07KG, light enough to hold in one hand while the runs are aligned. It works at the track's 48V DC, and it is rated for an operating temperature of 0°C to 40°C, so keep it to rooms that stay within that range all year. At 13.5mm high it stays low and discreet at the turn. As with any lighting installation, a qualified electrician should fit the system. A practical note: measure each run to its corner before ordering track, and add one connector to the order for every turn in the layout.
Specification

Length
68mm

Width
68mm

Height
13.5mm

Track Voltage
48V DC

Mounting
Surface

Use
1 kit for each corner connection

Finish
White

Operating Temperature
0°C to 40°C

Certification
CE

Weight
0.07KG

Warranty
5 Years

Frequently AskedWhat does this L-connector join?
It joins two lengths of the Viora surface magnetic track at a right angle, letting one run of track turn a corner and carry on.
Is the track included in the box?
No. You receive the connector only. The magnetic track and the track lights are not included and are bought separately.
How many L-connectors do I need?
You need one for each corner in your layout. The maker specifies one kit per corner connection, so count every turn before ordering.
How big is the connector?
It is 68mm long, 68mm wide and 13.5mm high, and it weighs 0.07KG, so it stays compact and low at the turn.
What voltage is the track?
The connector works at the track's 48V DC, and it is rated for an operating temperature from 0°C to 40°C.
Can it be recessed into the ceiling?
No. It is made for surface mounting, sitting on the surface together with the track rather than being set into plaster.