Sunset 30W LED Driver 11.5cm - White

Description

DescriptionA driver is the quiet, unseen part of an LED scheme, and this one is a shallow round unit finished in plain white, 115mm across and only 22mm deep. It is made to work with phase-cut dimming, the leading and trailing edge type used on ordinary household dimmer switches, so the light can be taken down low without a separate control system sitting behind it. The white casing is neutral enough to sit unnoticed alongside other white hardware.
We would choose this where a small LED fitting or a short run of them needs a tidy supply and the dimming has to behave properly at the bottom of the dial. It works as well in a kitchen, hallway or bedroom as it does in a shop fit or a small office where the lighting is dropped back through the evening, and the slim body keeps it unobtrusive wherever it ends up. It suits anyone specifying LED fittings that call for a constant current supply rather than mains voltage lamps.
Care comes down to keeping dust off the housing: isolate the circuit at the consumer unit, wipe the outer casing with a dry cloth and leave the terminals well alone. Keep it to dry interiors, away from bathroom zones, unheated outbuildings and anywhere that sees condensation. It carries a three year warranty. We stock the matching Sunset recessed bases in five sizes and in black, gold and white, and this is the driver we reach for when putting one of those schemes together, so the electrical side and the visible trim come from the same range. If you are ordering a base at the same time, check the load of the fitting you intend to run against the output figures listed below before you add it to the basket.
Specification

Colour
White

Weight
0.07KG

Diameter
115mm

Height
22mm

Materials Used
Aluminium

Lamp Cap
Not Applicable

LED Power
20W (±5%)

Type of Driver
Coie

Constant Current Output
500mA

Min/Max. Voltage Output
24-40V

Load Range
20W

Total Power Consumption
20W (±5%)

IP Rating
IP20

Warranty
3yrs

UKCA/CE
Yes

Pieces Included
1

Installation
Requires Installation By Qualified Electrician

Country of Origin
China

Frequently AskedWhat size is it?
It measures 115mm in diameter and 22mm in height, and weighs 0.07kg.
Can it be dimmed?
Yes. It is a phase-cut, triac compatible driver, so it works with standard leading and trailing edge dimmer switches.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry indoor rooms only, well away from splashes and steam.
Does it come with a recessed base or fitting?
No, the driver is supplied on its own. The Sunset recessed bases are sold separately in black, gold and white.
How many fittings can one driver run?
That depends on the total load of the LED fittings, which must sit within the driver's rated output shown in the specification table below.
Is there a warranty?
It carries a three year warranty.