Slim Fixed Round Recessed Downlight - Black

Description

Description
The Maytoni Slim is an 85mm diameter fixed recessed downlight in black cast aluminium with a GU10 fitting that accepts bulbs up to 50W. The downlight sits 30mm deep when recessed, with a fixed beam angle that directs light downward without tilt or rotation. The black powder-coated aluminium bezel provides a clean finish flush with the ceiling surface.

Designed for general downlighting in kitchens, hallways, offices and retail spaces, the Slim pairs a compact footprint with mains-voltage GU10 compatibility, allowing direct replacement of halogen bulbs with LED equivalents without additional drivers. The recessed installation uses spring clips that fit ceiling cut-outs between 68-75mm diameter, requiring a minimum 35mm void depth above the ceiling for the lamp housing and connection block.

The cast aluminium construction dissipates heat from the GU10 lamp holder, extending bulb life compared to plastic-bodied downlights. The black finish works in contemporary interiors where visible downlight bezels are part of the design language, or where ceiling colour is dark and a white bezel would create visual contrast. The IP20 rating limits use to dry indoor areas—not suitable for outdoor soffits or areas exposed to moisture.

Specification

Height
3cm

Diameter
8.5cm

Finish
Black

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Bulb Base
GU10

Wattage
50

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What size ceiling cut-out is needed?

The downlight requires a ceiling aperture of 68-75mm diameter and a minimum 35mm void depth above the ceiling for the lamp housing and terminal block. The visible bezel is 85mm diameter once installed.

Does it come with a bulb?

No, the downlight is supplied without a GU10 bulb. It accepts any standard GU10 lamp up to 50W, including LED, halogen or energy-saving variants sold separately.

Can it be used in bathrooms?

No. It is rated IP20, so it is for dry rooms only.

Is the beam angle adjustable?

No, this is a fixed downlight. The GU10 lamp holder is mounted in a fixed position and cannot be tilted or rotated once installed. The beam pattern depends on the specific GU10 bulb used.