Radiara 6W Constant Current LED Driver - DALI & Push, 150mA

Description

DescriptionThis is the Radiara constant current LED driver: a slim white box that delivers a steady 150mA to an LED load of up to 6W. It measures 119mm long, 22mm wide and 20mm high and weighs 0.08KG, so it suits a tight space where a bulkier unit would struggle. The maker lists it as an optional accessory, sold on its own, and the box holds the driver itself. Its job is simple and important: it turns mains power into the fixed current that LEDs of this rating need.
Choose it when the LED load you are powering calls for 150mA constant current and draws no more than 6W: a constant current driver holds the current fixed, so matching that figure is the decision that matters most. The two dimming modes suit two kinds of installation. DALI links the driver into a digital lighting control system, where each light can be addressed and dimmed individually. Push lets a simple push switch raise and lower the light, which suits a single room with no control system at all.
The casing is white with grey covers at each end, and the driver runs from a 220-240V AC supply at 50 or 60Hz. The maker rates it for an operating temperature from 0°C to 40°C, so it belongs somewhere that stays within that band: not an unheated loft that drops below freezing, and not right beside a heat source. As with any mains product, it is installed by a qualified electrician. Before you order, check the current and wattage your LED load needs: 150mA and no more than 6W is the match this driver makes.
Specification

Length
119mm

Width
22mm

Height
20mm

Output
150mA Constant Current, up to 6W

Input Voltage
220-240V AC, 50/60Hz

Dimming
DALI & Push

Operating Temperature
0°C to 40°C

Certification
CE

Weight
0.08KG

Warranty
5 Years

Frequently AskedWhat current and wattage does this driver deliver?
It delivers a constant 150mA and handles an LED load of up to 6W, so check that your LEDs call for exactly that current.
How is the driver dimmed?
It dims by DALI, for a digital lighting control system, or by Push, which uses a simple push switch to raise and lower the light.
How big is the driver?
It is 119mm long, 22mm wide and 20mm high, and it weighs 0.08KG, so it is small enough for a tight space.
What mains supply does it need?
It runs from a 220-240V AC mains supply at either 50Hz or 60Hz, so it suits mains at either frequency.
What operating temperature does it handle?
The maker rates it for 0°C to 40°C, so place it somewhere that stays above freezing and never runs hotter than 40°C.
What colour is the driver?
The casing is white, with grey covers at each end, giving the driver a plain and neutral look.