Plato LED Pendant Light - White

Description

Description
The Plato is an 18.5cm diameter LED pendant light with a white aluminium body and integrated 12W 3000K LED behind a frosted glass diffuser. The cylindrical canopy and pendant head share a matching white finish, and the height is adjustable from 35cm minimum to 195cm maximum using a simple pull-and-lock cable mechanism that requires no tools.

Designed for kitchen worktops, dining tables, bedside reading positions and home office desks, the Plato provides general downlight with a 120° beam angle that covers approximately 1.5-2m diameter at typical pendant heights. The height-adjust mechanism allows the pendant to be raised or lowered after installation, making it useful in rooms where ceiling heights vary or where the functional height above a surface changes with furniture rearrangement. The IP20 rating limits the fitting to dry interior locations only.

The frosted glass diffuser softens the LED source to reduce glare and provides even light distribution across the 120° spread. The aluminium construction keeps the weight low enough for standard ceiling roses, and the white finish pairs with cooler-toned interiors, Scandinavian styling, and clinical or minimal schemes where saturated colour is avoided. The 3000K colour temperature sits at the warmer end of the neutral white spectrum, reducing the clinical tone often associated with cooler 4000K-5000K sources.

Specification

Height
21.5cm

Diameter
18.5cm

Max Height
195cm

Min Height
35cm

Finish
White

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Wattage
12

Colour Temperature
3000K

Warranty
5 Year Guarantee

Downloads
Product Manual

Frequently Asked
How is the height adjusted?

The cable runs through a pull-and-lock mechanism inside the canopy. Pull the pendant head downwards to lengthen the drop, or push upwards to shorten it. The mechanism locks the cable in place at any point between 35cm and 195cm without needing tools or rewiring.

Is the Plato dimmable?

The integrated LED is rated at 12W on 220-240V mains. Dimmer compatibility depends on the specific dimmer model. Contact us before pairing with a dimmer to confirm compatibility with the Maytoni driver.

Can it be used in a bathroom?

No. The IP20 rating limits the Plato to dry interior locations only. It cannot be installed in bathrooms, wet rooms, or outdoor covered positions where moisture is present.

What area does the light cover?

The 120° beam angle covers approximately 1.5-2m diameter when the pendant is hung 60-80cm above a worktop or dining table. For wider coverage, increase the mounting height or use multiple pendants spaced along the surface.