Hidden Adjustable Retractable LED Recessed Downlight - White

Description

Description
The Maytoni Hidden is a 90mm diameter recessed downlight with a retractable tilt mechanism that allows the LED module to swing out and rotate within the ceiling aperture, directing light up to approximately 30 degrees off-centre. A 10W integrated LED provides 3000K warm white light through a white powder-coated aluminium bezel and plastic diffuser, with the entire fitting recessing flush into the ceiling plane when set vertical.

Designed for accent lighting in residential living rooms, hallways, retail displays and hospitality spaces where directed light is needed without visible track or surface-mounted fittings, the Hidden suits ceiling void depths of 100mm or greater. The swing-out mechanism allows the beam to be aimed at wall art, architectural

features, or specific zones within a room after installation, without needing to reposition the ceiling cut-out. The IP20 rating restricts use to dry indoor areas only.

The white finish on the visible bezel integrates cleanly with white or light-coloured ceilings, reducing visual contrast when the fitting is set flush. The aluminium and plastic construction keeps the fitting lightweight at under 200g, minimising load on plasterboard ceilings. The 3000K colour temperature gives a warm tone suited to residential and hospitality settings rather than the cooler 4000K-5000K temperatures used in office or clinical environments.

Specification

Height
9.7cm

Diameter
9cm

Finish
White

Construction
Aluminium & Plastic

IP Rating
IP20

Voltage
AC 220-240

Wattage
10

Colour Temperature
3000K

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What ceiling void depth is needed?

The fitting requires a minimum 100mm ceiling void depth to accommodate the 97mm height of the LED module and driver assembly. The 90mm diameter cut-out sits within standard joist spacing.

Can the tilt angle be adjusted after installation?

Yes. The LED module swings out on a pivot mechanism and can be rotated to aim the beam approximately 30 degrees off vertical in any direction, allowing accent lighting to be redirected without cutting a new ceiling aperture.

Is it dimmable?

Dimmer compatibility depends on the specific driver installed in this model. The product manual should specify whether a dimmable driver is fitted. If you need a dimmable version, contact us before ordering to confirm availability.

Can it be used in bathrooms?

No. The IP20 rating means the fitting is not protected against moisture ingress and must only be installed in dry indoor areas. For bathroom zones requiring IP44 or IP65 protection, see our bathroom downlight category.