Focus White Acrylic LED Track Light Diffuser - 5.2cm

Description

Description
The Focus is a 5.2cm diameter acrylic diffuser that fits onto Maytoni LED track spotlights to soften and spread the light output. The white plastic cylinder slips over the front of the spotlight head, converting a direct beam into diffused ambient light across a wider angle. This reduces glare and harsh shadows while maintaining the brightness of the LED source.

Designed for track lighting systems in residential and commercial settings, the diffuser suits reading corners, hallway accent lighting, retail displays and hospitality environments where direct spotlights would be too harsh. The 3.6cm depth means the diffuser projects forward from the spotlight head without adding significant visual bulk. The IP20 rating limits use to dry indoor locations only.

The white acrylic construction provides even light diffusion without visible striations or hotspots when lit. At 5.2cm outer diameter, the diffuser fits Maytoni's smaller track spotlight models — check the spotlight head diameter before ordering to confirm compatibility. The diffuser clips or screws onto the front of the spotlight depending on the specific track head model, and can be removed if direct beam lighting is needed later.

Specification

Length
3.6cm

Diameter
5.2cm

Finish
White

Construction
Plastic

IP Rating
IP20

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
Which Maytoni track spotlights is this compatible with?

The 5.2cm diameter suits Maytoni's smaller LED track spotlight models. Measure the outer diameter of your spotlight head before ordering — the diffuser should be a close fit to the head diameter. The product manual linked above includes a compatibility list for specific model numbers.

Does it reduce the light output significantly?

The white acrylic diffuses and spreads the beam angle, which reduces the intensity at the centre of the beam but increases the lit area overall. Most users find the total perceived brightness similar to the undiffused spotlight, just distributed more evenly across a wider area.

Can it be used in bathrooms or outdoors?

No. The IP20 rating means the diffuser is not protected against water ingress and must only be used in dry indoor locations. For bathrooms, specify track lighting with a minimum IP44 rating and check that any diffuser accessory carries the same rating.

How is it fitted to the spotlight?

Fitting method depends on the specific Maytoni track head model. Some models use a push-fit clip system, others use a threaded screw ring. Refer to the product manual for the exact fitting procedure for your spotlight model.