Trinity 1m Three-Phase Surface-Mounted Track - White

Description

Description
The Trinity is a 1m three-phase surface-mounted track in white powder-coated aluminium, designed to support lighting fixtures across three independent circuits. Each phase can be controlled separately, allowing three groups of spotlights or pendants to be switched or dimmed independently from a single track run.

Intended for residential kitchens, retail displays, galleries and commercial offices where flexible accent or task lighting is needed, the track mounts directly to the ceiling surface without requiring recessed installation. The 1m length can be cut to custom sizes on site to fit specific room dimensions or to terminate at walls and corners. A power inlet feeds mains voltage into the track, and compatible track heads clip into the channel to draw power from whichever of the three phases they're assigned to.

The aluminium extrusion measures 33mm wide by 36mm high, giving a low-profile appearance when mounted. The white finish pairs with white ceilings to minimise visual presence, or can be left as a visible design element in industrial or contemporary interiors. The track accepts Maytoni and compatible third-party track heads rated for three-phase systems, including adjustable spotlights, pendant adaptors and linear modules. IP20 rating restricts use to dry indoor environments.

Multiple 1m sections can be joined using straight connectors (sold separately) to create longer runs, or L-connectors and T-connectors can be added to route the track around corners or branch off into multiple directions. The track carries up to 16A per phase on 220-240V AC mains, giving a maximum combined load across all three phases of approximately 11kW.

Specification

Height
3.6cm

Length
100cm

Width
3.3cm

Finish
White

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What's the difference between three-phase track and single-phase track?

Three-phase track carries three independent circuits within the same channel, allowing fixtures to be grouped and controlled separately. Single-phase track has only one circuit, so all fixtures turn on and off together. Three-phase is useful when you want different zones or groups of lights to operate independently from the same track run.

Can this track be cut to length?

Yes. The 1m aluminium extrusion can be cut to custom lengths on site using a hacksaw or mitre saw. Cut ends should be deburred before installation to ensure track heads fit cleanly.

What accessories are needed for installation?

A power inlet is included to connect mains voltage to the track. Additional components such as end caps, straight connectors, L-connectors and T-connectors are sold separately and are required to terminate the track, join multiple sections, or create corner and branch configurations.

Are track heads included?

No. The track is sold separately from the lighting fixtures. Compatible three-phase track heads, spotlights and pendant adaptors are available separately and clip into the track channel once the track is mounted and powered.