Terni Pro 3 Light Downlight - Black

Description

DescriptionThe Terni Pro is a three light downlight that sits recessed into the ceiling, with a rectangular black plate carrying three round, adjustable lamp holders in a neat row. The body is cast aluminium finished in black, and the fitting is 25.7cm long and 9.2cm wide, so it reads as one tidy piece rather than three separate spots. Each holder takes a GU10 bulb, and the bulbs are not included, which leaves you free to pick the brightness and colour of light that suit the room. It weighs 0.84KG.
Three lights from a single cut-out make this a practical choice over a dining table, along a hallway or across a living room ceiling, where one spot on its own would leave dark corners. Because each holder adjusts, you can angle the beams towards a painting, a bookcase or a favourite chair instead of pointing every beam at the floor. The black finish looks crisp against a dark ceiling and gives a deliberate contrast against white plaster, so it suits modern and industrial interiors alike.
Before you buy, measure the ceiling void: the fitting needs a recess depth of 13.5cm and a ceiling cut-out of 24.5cm, and it stands 12.5cm high overall. It runs on 220-240V, 50/60Hz mains and has no switch of its own, so it works from your wall switch like any other ceiling light. As a wired-in mains light, it should be installed by a qualified electrician, and the installation instructions are available as a download. To keep the black aluminium looking its best, let the bulbs cool and wipe the plate with a dry, soft cloth.
Specification

Body Material
Cast aluminium

Body Colour
Black

Light Source
GU10 (bulb not included)

Length
25.7cm

Width
9.2cm

Height
12.5cm

Recess Depth
13.5cm

Cut-Out
24.5cm

Weight
0.84KG

Protection Class
Class II

Voltage
220-240V, 50/60Hz

Operating Voltage
220-240V, 50/60Hz

Switch
None (switched at the wall)

DownloadsInstallation Instructions (PDF)
Frequently AskedWhich bulbs does the Terni Pro take?
Each of the three holders takes a GU10 bulb. The bulbs are not included, so you can choose the brightness and colour of light that suit your room.
How deep does the ceiling void need to be?
The fitting needs a recess depth of 13.5cm, so check there is at least that much clear space within the ceiling void before you buy.
What size cut-out does it need?
It needs a ceiling cut-out of 24.5cm, and the fitting itself is 25.7cm long and 9.2cm wide once it is fitted.
Can the lights be angled?
Yes, each of the three round holders is adjustable, so you can angle the light towards a picture, a shelf or a seating area rather than straight onto the floor.
Does it have its own switch?
No, there is no switch on the fitting itself. It runs on 220-240V, 50/60Hz mains and is controlled from your wall switch.
What material is the body?
The body is cast aluminium finished in black, and the whole three light downlight weighs 0.84KG.