Talvera P LED Downlight - Nickel

Description

DescriptionThe Talvera P is a compact recessed LED downlight with a cast aluminium body in satin nickel, a brushed metal finish with a soft sheen that looks quietly polished in a white ceiling. The light comes from an integrated LED at 4000K, a neutral light that gives clear, even light for reading, working or getting ready in the morning, and it shines through clear glass set in front of a faceted reflector. It is 7.5cm across and 5.5cm tall, so only a slim ring of nickel shows once it is fitted.
We would put it where you want tidy light from the ceiling without a hanging shade: hallways, landings, living rooms, studies and dressing areas, set singly or in neat rows. The satin nickel sits comfortably beside brushed steel handles, nickel switch plates and grey or white walls, so it suits a modern home as well as a softer traditional one. There is no switch on the light itself, so it runs from your wall switch like any other ceiling light, and the 4000K helps a study or a landing feel bright and awake through a winter evening.
Before ordering, check your ceiling: the Talvera P needs a round hole between 6.6 and 6.8cm across and 6.5cm of clear depth above the ceiling surface, which matters most under joists or in a shallow void. Spring clips hold it against the ceiling, and at 0.12KG it puts very little load on the board around the hole. The LEDs are replaceable, so when the light source eventually fades you replace the LED rather than the whole downlight, and the hole you cut stays the same. It is installed by a qualified electrician, and the installation instructions come as a download. Measure the cut-out and the depth first, and the fitting goes in cleanly.
Specification

Colour Temperature
4000K

Body Material
Cast aluminium

Body Colour
Satin Nickel

Shade Material
Glass

Shade Colour
Clear

Light Source
LED, integrated

Features
Replaceable LEDs

Height
5.5cm

Diameter
7.5cm

Recess Depth
6.5cm

Cut-Out
6.6–6.8cm

Weight
0.12KG

Protection Class
Class III

Operating Voltage
200mA

Switch
None (switched at the wall)

DownloadsInstallation Instructions (PDF)
Frequently AskedWhat size hole does the Talvera P need?
It needs a round cut-out between 6.6 and 6.8cm across, with 6.5cm of clear depth above the ceiling surface for the body.
What colour of white light does it give?
The integrated LED gives 4000K, a neutral light that feels clear and bright, well suited to hallways, studies and landings.
Can the LEDs be replaced?
Yes, the LEDs are replaceable, so when the light source eventually fades you change the LED instead of the whole downlight.
What finish does the downlight have?
The cast aluminium body is finished in satin nickel, a brushed metal look with a soft sheen, and the shade is clear glass.
Does it have its own switch?
No, there is no switch on the light, so it is switched at the wall like any other ceiling light in the room.
How heavy is the downlight?
It weighs 0.12KG, so it adds very little load to the ceiling, and spring clips hold it in place.