Ceiling Holder for Pendants - Black

Description

Description
The Ceiling Holder for Pendants grips the flex at whatever drop you set it to and covers the ceiling outlet behind it. A short black cylinder with a plain flat top, opened out at one side into a long slot where the cord is gripped. The lamp ring shows as a fine spiral inside the opening on the top face. A small oval boss stands out on the side of the body and holds the grub screw that clamps the cord. The moulding is a flat even black with a fine grain to it, and there is no metal visible apart from the ring inside. It is a plain working holder meant to be almost invisible against a dark ceiling. It hangs as a ceiling suspension, and the collar locks the flex at whatever drop you set.

It closes the ceiling outlet and holds the flex, so a pendant hangs level and the drop stays where it is set. It is a part rather than a finished fitting, so it is bought alongside whatever it is going to carry or connect to rather than on its own. That is the point of buying the pieces separately: the shade, the flex and the holder are each chosen on their own, and a run can be made up to a length and a drop that no finished pendant would give you.

It is class II, double insulated, so it needs no earth, and it is rated IP20 for dry indoor rooms.

Specification

Finish
Black

Insulation Class
Class II

IP Rating
IP20

Suitable Location
Indoor, dry rooms

Downloads
Instruction manual (PDF)

Frequently Asked
Does it need an earth?
No. It is class II, double insulated, so it is wired live and neutral only.

Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.