Ull 2 Light Wall Light - Silver Grey

Description

Description
The Ull is a 2-light wall light with silver grey metalwork and two frosted glass shades, each housing a G9 bulb fitting rated to 40W per socket. The twin arched arms position the shades at slight angles, directing light both upward and outward from the wall, providing a mix of ambient wash and direct task light suitable for hallway positioning or bedside reading.

Designed for installation on standard UK wall wiring, the Ull mounts to a 266mm-wide backplate with an 85mm projection from the wall once fitted. The compact 155mm height allows installation in rooms with lower ceilings or where wall space is constrained by doorframes, switches or adjacent fittings. The frosted glass diffuses direct glare from the G9 capsules while retaining enough brightness for corridor navigation or bedside reading.

The silver grey finish on the metalwork sits between polished chrome and brushed steel, providing a neutral base that pairs with both cool-toned contemporary and warmer traditional schemes. Dimmable when paired with dimmable G9 LED or halogen capsules (sold separately), allowing brightness to be adjusted for morning routines or evening ambience. The 1.4kg weight requires secure fixing to plasterboard with cavity anchors or direct fixing to masonry or stud positions.
The fitting is designed for dry indoor use.

Specification

Colour Finish 1
Silver Grey

Shade Colour
Frosted

Width
266mm

Height
155mm

Projection
85mm

Number Of Bulbs
2

Lamp Socket
G9

Power Consumption
2 x 40W max (lamps not included)

Voltage
220-240V~50/60Hz

Dimmable
Yes – Dimmable Lamps Required

Weight
1.4KG

Warranty
1 Year

Frequently Asked
What bulbs does it take?

The Ull takes two G9 capsule bulbs rated to 40W maximum per socket. Bulbs are sold separately. We suggest pairing this with dimmable G9 LED capsules between 3-5W and 2700K-3000K for bedroom or hallway use.

Is it dimmable?

Yes, when fitted with dimmable G9 bulbs and wired to a compatible dimmer switch. Standard non-dimmable G9 bulbs will not dim and may flicker or fail if used with a dimmer.

Can it be used in bathrooms?

No. It has no stated IP rating, so it is for dry rooms only.

What wall fixing is needed?

The 1.4kg weight requires secure fixing. On plasterboard walls, use cavity anchors rated to at least 5kg per fixing point. On masonry or brick, use wall plugs and screws appropriate to the substrate. The backplate has mounting holes for standard UK spacing.