Zero 3 Light Flush Ceiling Light - White Opal Diffuser 370mm

Description

Description
The Zero is a 370mm flush ceiling light with a white-finished metal base plate and an opal white diffuser that sits 110mm from the ceiling when fitted. Three E27 bulb holders behind the diffuser allow you to choose the light output and colour temperature by selecting your own bulbs, sold separately.

Designed for rooms with ceiling heights below 2.4m where a pendant would hang too low, the Zero suits hallways, utility rooms and compact bedrooms. The opal diffuser spreads light evenly across the ceiling plane without visible hot spots or glare from the bulbs beneath. The 370mm diameter covers a typical 100mm ceiling rose and provides enough spread for a room up to 10-12 square metres when paired with 3 x 8-10W LED bulbs at 800-1000 lumens each.

The white powder-coated metal base and opal acrylic diffuser give the fitting a combined weight of 0.6kg, light enough to fit standard plasterboard ceilings without additional support. The flush-mount design leaves no gap between the base plate and the ceiling, minimising dust range and giving a cleaner line than semi-flush fittings. Dimming requires dimmable bulbs and a compatible dimmer switch on the lighting circuit.
The fitting is designed for dry indoor use.

Specification

Colour Finish 1
White

Shade Colour
Opal White

Diameter
370mm

Height
110mm

Number Of Bulbs
3

Lamp Socket
E27

Power Consumption
Dependent On Lamps Used

Voltage
220-240V~50/60Hz

Dimmable
Yes – Suitable Lamps & Dimmer Required

Weight
0.6KG

Warranty
1 Year

Frequently Asked
What bulbs does it take?

The Zero takes three E27 (Edison screw) bulbs, sold separately. We suggest pairing this with 8-10W LED bulbs at 2700K-3000K warm white for general ambient lighting. Maximum wattage depends on bulb type. Check the bulb packaging for heat output if using halogen or high-wattage LEDs.

Is it suitable for low ceilings?

Yes. The 110mm projection from the ceiling makes the Zero well-suited to rooms with ceiling heights below 2.4m where pendants would hang too low. It sits flush against the ceiling with no visible gap.

Can it be used in a bathroom?

No. It has no stated IP rating, so it is for dry rooms only.

Is it dimmable?

Yes, when paired with dimmable E27 bulbs and a compatible dimmer switch on the lighting circuit. The fitting itself has no integrated dimming. Dimmer compatibility depends entirely on the bulbs you choose.