Trinity 3-Phase Left Corner Track Connector - Black

Description

Description
The Maytoni Trinity left corner connector is a surface-mounted component for 3-phase track lighting systems, designed to join two sections of track at a 90-degree external left-hand corner. The connector houses three live phase rails that maintain electrical continuity through the turn, allowing track spotlights to be positioned and powered continuously around corners without interruption.

Used in retail, gallery, kitchen and commercial settings where track runs need to follow wall perimeters or ceiling beams, the connector supports the same AC 220-240V three-phase power as the track sections it joins. The 9.9cm square footprint with 3.2cm height sits flush against ceiling or wall surfaces, and the external-corner design means the connector sits proud of the track junction rather than recessed into it.

The injection-moulded plastic body carries an IP20 rating, making it suitable for dry indoor environments only. The matt black finish matches Maytoni's Trinity track system range, maintaining a consistent appearance across straight sections, connectors and end caps. The connector clicks into place on standard Trinity track profiles without tools for the mechanical join, though the electrical connection requires a qualified electrician to wire the phase rails correctly.

Specification

Height
3.2cm

Length
9.9cm

Width
9.9cm

Finish
Black

Construction
Plastic

IP Rating
IP20

Voltage
AC 220-240

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What's the difference between a left and right corner connector?

Left and right corner connectors are mirror images of each other. The designation refers to the direction of the turn when viewed from the power feed end of the track system. A left corner connector turns the track 90 degrees to the left; a right connector turns it to the right. Installing the wrong orientation will prevent the track sections from aligning.

Does this connector carry all three phase rails through the corner?

Yes. The connector maintains electrical continuity for all three phase rails around the 90-degree turn, so track spotlights can be positioned and powered on any phase throughout the corner section.

Can this be installed by a non-electrician?

The mechanical clip-in fitting can be done without electrical qualifications, but connecting the phase rails to mains power and ensuring correct phase continuity through the connector requires a qualified electrician. Incorrect wiring can cause phase imbalance or short circuits.

Is this compatible with other 3-phase track systems?

The Trinity connector is designed specifically for Maytoni Trinity track profiles. While some 3-phase track systems share similar dimensions, the rail spacing and mechanical clip design vary between manufacturers, so cross-compatibility is not guaranteed.