On Left LED Wall Light With Switch - Polished Chrome

Description

Description
The On Left is a polished chrome LED wall light with a curved arm that extends 350mm upward from a circular 120mm base plate, ending in a frosted acrylic diffuser. An integrated 5W LED inside the diffuser produces 500 lumens at 3000K warm white, and a small switch sits on the base plate for on/off control without needing a wall switch.

Designed for bedside use, reading corners and hallway accent lighting, the On Left is handed to sit on the left side of a bed or seating position, with the curved arm sweeping up and away to the right. The 60mm projection from the wall keeps the fitting compact enough for narrow corridors and tight bedside spaces. Pairs with the matching On Right (sold separately) to create symmetrical lighting either side of a bed, mirror or artwork.

The polished chrome finish provides high reflectivity and pairs with both contemporary and classical interiors, while the frosted diffuser softens the LED source to prevent direct glare when viewed from below. At 500 lumens and 5W the output is sufficient for reading and ambient bedside lighting without overwhelming a small room. The LED is non-dimmable and non-replaceable, with a rated lifespan of approximately 25,000 hours.
Specification

Colour Finish 1
Polished Chrome

Colour Finish 2
Frosted White

Width
120mm

Height
350mm

Projection
60mm

Number Of Bulbs
1

Lamp Socket
Integrated LED

Colour Temperature
3000K Warm White

Lumen
500lm

Power Consumption
5W

Voltage
220-240V~50/60Hz

Dimmable
No

Weight
0.50KG

Warranty
3 Year

Frequently Asked
Is this dimmable?

No. The integrated LED operates at a fixed 500lm output and cannot be dimmed. The on/off switch on the base plate is the only control.

What does 'left-hand' mean?

The fitting is designed to be mounted on the left side of a bed or seating position, with the curved arm sweeping up and to the right. A matching On Right version (sold separately) mirrors this orientation for symmetrical installation.

Can the LED be replaced?

No. The LED is integrated into the fitting and cannot be replaced. The LED has a rated lifespan of approximately 25,000 hours, which equates to roughly 10-15 years of typical domestic use.

What height should it be mounted at?

For bedside use, the base plate is typically mounted 1.2-1.4m above the floor, which places the light source at a comfortable reading height when seated or lying in bed. For hallway use, mount at 1.6-1.8m to avoid head-height obstructions.