Niseko Ring LED Flush Ceiling Light 3000K 48W - Gold

Description

Description
The Niseko Ring is a 650mm flush ceiling light built around a circular integrated LED module delivering 48W and 3900 lumens at 3000K warm white. A gold-finished metal ring frames an opal acrylic diffuser that spreads light evenly across the ceiling plane and down into the room. At 95mm total height from ceiling to lowest point, the fitting suits rooms with ceiling heights of 2.3m or above where a pendant would hang too low.

Designed for general room lighting in living rooms, dining rooms, bedrooms and hallways, the Niseko Ring provides enough output to act as the primary light source in spaces up to 18-20m². The 110° beam angle gives wide coverage without creating harsh shadows, and the opal diffuser softens the LED array to prevent glare when looking up at the ceiling. The gold finish reads as a warm metallic accent under both daylight and evening artificial light.

The ring construction gives the fitting a sculptural presence that reads as more intentional than a standard disc flush. The gold finish pairs well with warm-toned timber, brass hardware, marble and neutral textiles in contemporary and transitional interiors. The integrated LED is non-replaceable but carries a 3-year warranty covering the entire fitting. At 3.7kg the fitting requires secure fixings into a ceiling joist or between-joist noggin rather than plasterboard alone.
Specification

Colour Finish 1
Gold

Diameter
650mm

Height
95mm

Number Of Bulbs
1

Lamp Socket
Integrated LED

Colour Temperature
3000K Warm White

Beam Angle
110°

Lumen
3900lm

Power Consumption
48W

Voltage
220-240V~50/60Hz

Dimmable
No

Weight
3.7KG

Warranty
3 Year

Frequently Asked
Is the Niseko Ring dimmable?

No. The integrated LED module does not support dimming. The fitting operates at a fixed 48W output when switched on.

What room size does it suit?

The 3900 lumen output at 3000K suits rooms of approximately 18-20m² as the primary light source. For larger rooms it can be paired with additional fittings or used as ambient lighting alongside task lights.

How is it fitted to the ceiling?

At 3.7kg the fitting requires secure fixings into a ceiling joist or a noggin installed between joists. Plasterboard-only fixings are not sufficient. The fitting connects to standard UK mains wiring and mounts to a ceiling rose or junction box.

Can the LED be replaced when it fails?

No. The LED is integrated into the fitting and is not user-replaceable. The entire fitting carries a 3-year warranty covering the LED module and all components.