Merbessa Beam Pattern Flush Ceiling Light - White

Description

DescriptionThe Merbessa is a flush ceiling light in white, with a shallow satin glass shade decorated with a sunbeam motif: frosted bands that fan out from the centre to the rim. It measures 25cm in diameter and 7cm high, so it sits close to the ceiling rather than hanging down into the room. It takes an E27 bulb of up to 25W, not included, and its IP20 rating means it belongs indoors in a dry room.
Because it stays tight to the ceiling, it is a good choice for a hallway, landing or bedroom, and for any room where the ceiling is too low for a pendant. The compact diameter keeps it in proportion in a smaller room, while the white glass sits quietly against a white ceiling until the bulb is lit and the beam pattern glows softly. There is no switch on the light itself, so it works from a wall switch and nobody has to reach up for a pull cord.
The body is steel finished in white, and the satin glass shade is held by small clips around its edge. Satin glass diffuses light and softens the glare of a bare bulb, and because the bulb is your choice, so is the warmth of the light. At 0.615KG packed, it is easy to lift into place. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions come as a download. Glass wipes clean with a soft, dry cloth, which keeps the sunbeam motif crisp and bright.
Specification

Height
7cm

Diameter
25cm

Body Material
Steel

Body Colour
White

Shade Material
Satin glass

Shade Colour
Sunbeam motif

Light Source
E27 (bulb not included)

Wattage
Max 25W

Switch
None (switched at the wall)

IP Rating
IP20

Protection Class
Class I

Voltage
220-240V, 50/60Hz

Weight (packed)
0.615KG

DownloadsInstallation Instructions (PDF)
Frequently AskedCan this ceiling light go in a bathroom?
No. It carries an IP20 rating, which means it is meant for indoor, dry rooms only, so a bathroom or anywhere near water is not suitable.
What bulb does the Merbessa take?
It takes an E27 bulb, the large screw cap, at up to 25W. The bulb is not included, so you choose the colour of light yourself.
How big is the Merbessa flush ceiling light?
It is 25cm in diameter and 7cm high, so it sits close to the ceiling and suits rooms where headroom is limited.
What material is the shade?
The shade is satin glass with a frosted sunbeam motif fanning out from the centre, and the body behind it is steel in white.
Does it have its own switch?
No, there is no switch on the light itself. It is switched at the wall, so it works from a wall switch in the usual way.