Fismenne LED Flush Ceiling Light 33cm - White

Description

DescriptionThe Fismenne is a round LED flush ceiling light that sits close to the ceiling, 33cm across and just 6.5cm deep. A white steel body holds a white plastic diffuser moulded with soft, flowing waves, so the shade still shows its texture with the light unlit. The integrated LED draws 14.6W and gives 1,600lm at 3000K, a warm light, and as the LEDs are part of the fitting, there is no bulb to fit. It is rated IP20, which settles where it belongs: indoors, in dry rooms.
Because it sits so close to the ceiling, this flush light suits rooms with lower ceilings, where a pendant would hang too low. We would put it in a bedroom, a hallway, a landing, a study or a living room, anywhere one fitting needs to light the space without drawing the eye. An output of 1,600lm is generous for a light of this size, and the warm 3000K tone keeps a room comfortable through the evening. The wave relief gives a plain white ceiling a little movement without adding colour, so it sits happily alongside most schemes.
The body is steel and the diffuser is plastic, both in white, and a soft, dry cloth with the power switched off keeps the shade looking fresh. It is not dimmable and has no switch of its own, as it is switched at the wall. It runs on 220-240V, 50/60Hz, carries an energy class of F and weighs 0.682KG packed. As a wired mains light, it is installed by a qualified electrician, and the installation instructions are available as a download. Put it on a standard wall switch rather than a dimmer and it gives the same steady, warm light every time.
Specification

Height
6.5cm

Diameter
33cm

Body Material
Steel

Body Colour
White

Shade Material
Plastic

Shade Colour
White

Light Source
LED, integrated

Wattage
14.6W

Lumens
1,600lm

Colour Temperature
3000K

Dimmable
No

Switch
None (switched at the wall)

IP Rating
IP20

Protection Class
Class I

Voltage
220-240V, 50/60Hz

Energy Class
F

Weight (packed)
0.682KG

DownloadsInstallation Instructions (PDF)
Frequently AskedCan this ceiling light go in a bathroom?
No. It is rated IP20, which means it is meant for indoor, dry rooms only, so we would keep it out of bathrooms and away from water.
Is the Fismenne dimmable?
No, it is not dimmable. It has no switch of its own and is switched at the wall, so a standard wall switch suits it best.
How bright is the light?
The integrated LED gives 1,600lm from 14.6W at a colour temperature of 3000K, which is a warm tone.
Does it need a bulb?
No. The LEDs are integrated into the fitting, so there is no separate bulb to buy or fit.
How big is the Fismenne?
It measures 33cm across and 6.5cm deep, a slim profile that keeps it close to the ceiling in rooms with lower ceilings.
What

materials are the body and shade?
The body is white steel and the shade is white plastic, moulded with a flowing wave relief that gives it texture.