Bar Outdoor LED Downlight 12W 3000K - Graphite

Description

Description
The Bar is a 108mm diameter surface-mounted outdoor downlight in a graphite metal cylinder housing with an integrated 12W 3000K LED. The fitting projects 155mm from the ceiling or soffit and casts a focused downward beam through a honeycomb anti-glare lens set into the base of the cylinder. The IP65 rating seals the body against dust and water jets, making it suitable for year-round installation under eaves, canopies, porches and covered outdoor walkways.

Designed for mounting to soffits, porch ceilings and overhangs, the Bar provides accent and task lighting for doorways, pathways, covered patios and building facades. The 12W LED delivers 3000K warm-white light at mains voltage (AC 220-240V) without needing an external driver, so the fitting connects directly to standard outdoor lighting circuits. The graphite finish is a mid-tone grey with a low-sheen powder coat that resists corrosion and pairs with contemporary, industrial and minimalist exteriors.

The metal body is cold-forged aluminium with internal heat-dissipation fins that keep the LED module within operating temperature in ambient conditions up to 40°C. The honeycomb lens controls beam spread and reduces glare when viewed from below, making the fitting comfortable to walk under. The 108mm diameter is compact enough to install in multiples along a soffit run or pergola beam without visual crowding, while the 155mm projection gives clearance for doorways and walkways with ceiling heights of 2.2m or above.

Specification

Height
15.5cm

Diameter
10.8cm

Finish
Graphite

Construction
Metal

IP Rating
IP65

Voltage
AC 220-240

Wattage
12

Colour Temperature
3000K

Warranty
3 Year Guarantee

Downloads
Product Manual

Frequently Asked
Is the Bar suitable for fully exposed outdoor installation?

The IP65 rating protects against dust and water jets, making the Bar suitable for installation under eaves, soffits, canopies and covered porches. For fully exposed positions subject to heavy rain or direct water spray, consider a higher-rated IP fitting or ensure the fitting is angled to prevent water pooling on the lens.

Does it need an external driver?

No. The integrated 12W LED operates directly from mains voltage (AC 220-240V), so the fitting wires into standard outdoor lighting circuits without a separate driver unit.

What beam angle does it produce?

Maytoni does not publish the exact beam angle for this model, but the honeycomb anti-glare lens indicates a controlled downward beam rather than wide flood. Expect a focused accent beam suitable for highlighting doorways, pathways or building

features rather than broad area coverage.

Can multiple fittings be installed in a row along a soffit?

Yes. The 108mm diameter is compact enough to install in multiples along a soffit run, pergola beam or canopy edge. Space fittings 1-1.5m apart for continuous pathway lighting or 2-3m apart for accent positions.