5W GU10 LED Emergency Kit - White

Description

Description
The Knightsbridge 5W GU10 LED Emergency Kit provides maintained / non-maintained / switched escape illumination on loss of mains, IP20 rated, with an integral rechargeable battery.

It provides escape illumination on loss of mains supply, operating in maintained or non-maintained mode as specified, with an integral battery that recharges automatically when power is restored. Maintained and non-maintained use.

It is constructed from polycarbonate. It is certified to BS EN 60598-2-22 and IP20 rated for indoor use.

Specification

Length
185 mm

Height
40 mm

Width
50 mm

Cut-out Diameter
55 mm

Construction
Polycarbonate

Finish
White

Class
II

IP Rating
IP20

Primary Voltage
230V 50Hz

Emergency Mode
Maintained / Non-maintained / Switched

Cap/Fitting
GU10

Dimmable
No

Max. Wattage
7 W

Lamp Included
No

Warranty
3 years (including battery)

Downloads
Product Specification Sheet

Frequently Asked
What is the difference between maintained and non-maintained emergency lighting?

A maintained fitting is lit during normal operation and stays lit on battery during a mains failure; a non-maintained fitting is off in normal use and only illuminates when the mains fails.

How often should emergency lighting be tested?

Emergency lighting should be given a short functional test monthly and a full-duration (typically 3-hour) discharge test annually, with results recorded, in line with BS 5266.

Is emergency lighting a legal requirement?

In most non-domestic premises emergency escape lighting is required to meet fire safety legislation and BS 5266; the specific provision follows a risk assessment.

How long does the battery last in a power cut?

These fittings provide the rated emergency duration (commonly 3 hours) from a fully charged battery before recharging when the mains is restored.