6ft 50W Modular DALI CCT Adjustable Batten - White

Description

Description
The Knightsbridge LED batten is a 6ft 50W surface-mounted linear fitting in white, IP20 rated.

It is a slim surface-mounted linear fitting with integrated LED and driver, giving bright, efficient general illumination for garages, utility rooms, lofts and commercial spaces. Optional modular DALI emergency conversion kit, MODEMKITDA.

It is constructed from pressed steel and polycarbonate. It is certified to BS EN 60598-1 and IP20 rated for indoor use.

Specification

Length
1790 mm

Width
61 mm

Projection
70 mm

Construction
Pressed steel

Finish
White

Class
I

IP Rating
IP20

Primary Voltage
230V 50Hz

Diffuser
Opal

Light Technology
LED

Dimmable
DALI/PUSH DIM

Wattage
50W

Energy Efficiency Class
C

Colour Temperature
3000 / 4000 / 5700K

Beam Angle
120°

Light Colour
CCT

Lumens
6600–7300 lm (mode dependent)

CRI
>85

Lamp Included
Yes

Driver Type
Constant Current

Warranty
7 years

Downloads
Product Specification Sheet

Frequently Asked
What is an LED batten?

An LED batten is a slim, surface-mounted linear light fitting with the LED and driver integrated, widely used for garages, utility rooms, lofts and commercial spaces.

Are LED battens dimmable?

Dimmable and DALI models are marked as such; standard models are non-dimmable. Check the specification before pairing with a control system.

Can LED battens be linked together?

Linkable models can be connected in a run from a single supply where stated; otherwise each fitting is wired independently. Installation should be carried out by a competent person in accordance with BS 7671.

What size batten do I need for a garage?

As a guide, a single-car garage is well served by a 4ft or 5ft batten, with a 6ft or multiple fittings for larger or double garages, sized on the lumen output.