Sunset 21W LED Driver 92mm - White
Original price was: €18.€8Current price is: €8. TVA incluse
Expédition et livraison
Retours gratuits sous 30 jours
Description
Description
DescriptionThis is the control gear rather than the light itself: a small white driver that takes the mains supply and hands an LED fitting the steady current it needs to run properly. Output is a constant 500mA, and it is a plain on/off device, so the circuit is switched at the wall and the light comes up at full brightness. The body is a shallow round disc, 92mm across, in white. We keep it as our everyday driver for modest LED loads.
It is meant to work alongside LED fittings of matching current draw, including the recessed bases in this range, and it belongs in dry indoor rooms rather than anywhere exposed to weather or splashing. Hallways, kitchens, sitting rooms, bedrooms, and small commercial ceilings are all fair ground. It suits two kinds of buyer: the one replacing a driver that has given up, and the one putting a scheme together from separate parts who would rather the gear came from the same family as the fittings. If you want the lights on a dimmer, we would steer you to a dimmable driver instead, as this one does not dim.
The casing is white all over, low and round, so it reads as a neat disc rather than a box. Housekeeping is minimal: switch off at the consumer unit first, then lift any dust off the casing with a dry cloth, and keep liquids and aerosol cleaners away from it altogether. It carries a three year warranty. The wider range runs to recessed bases in several sizes with different cut-outs, offered in black, gold and white, so the driver can be bought alongside whichever of those you have settled on. It is sold on its own, without a fitting.
Specification
Colour
White
Weight
0.07KG
Diameter
92mm
Height
25mm
Materials Used
Aluminium
Lamp Cap
Not Applicable
LED Power
20W (±5%)
Type of Driver
Eaglerise
Constant Current Output
500mA
Min/Max. Voltage Output
25-42V
Load Range
20W
Total Power Consumption
20W (±5%)
IP Rating
IP20
Warranty
3yrs
UKCA/CE
Yes
Pieces Included
1
Installation
Requires Installation By Qualified Electrician
Country of Origin
China
Frequently AskedWhat size is the driver?
It measures 92mm in diameter and 25mm in height, and weighs 0.07kg.
Can it be used on a dimmer switch?
No. It is an on/off driver only, so the light will come on at full output and cannot be dimmed.
What output does it give?
A constant current of 500mA. It is sold as our 20W driver, so check that the fitting you are pairing it with sits within that.
Is it suitable for a bathroom or an outbuilding?
It is rated IP20, which means dry indoor locations only. Keep it away from damp, splashing and anywhere unheated.
How should it be cleaned?
Isolate the circuit, then wipe the casing with a dry cloth. Do not use water, solvents or spray cleaners on it.
Is there a warranty?
Yes, it carries a three year warranty from the manufacturer.
Créez votre lot




