Stockholm LED Dimmable 3-Step Flush Ceiling Light - Brown
Original price was: €333.€136Current price is: €136. TVA incluse
Expédition et livraison
Retours gratuits sous 30 jours
Description
Description
Description
Stockholm is a ceiling light in brown. A wide, very shallow opal glass dome sitting tight against the ceiling, its face broad and softly domed and turning down at the outer edge. Bands of warm grey-brown marbling sweep across the glass in broad sweeps, so no two faces are alike. A small brushed metal boss finishes the dead centre of the face. The glass is thick and evenly diffusing, so no lamp shows through it. It is very wide and low and there is no fixing visible from below. It measures 31cm across and 4.5cm tall, in glass and metal.
Mounted flush it clears a doorway and a low ceiling, so a corridor, a landing or a small bedroom is its territory, and it lights the whole room evenly rather than pooling on one surface. It is the light you put in first and stop noticing, which is the point of a flush fitting: it does the general lighting so the lamps in the room can do the rest.
The LED is built in at 18W, so there is no bulb to buy and none to fit. It has 3 brightness settings, at 100%, 50% and 10% of output, changed by switching off at the wall and straight back on, so no dimmer is needed. The driver remembers whichever level you last left it on. It is rated IP20, for dry indoor rooms. It carries an E energy label.
Specification
Diameter
31cm
Height
4.5cm
Finish
Brown
Material
Glass, metal
Light Source
Integrated LED
Power
18W
Brightness Settings
100%, 50% and 10%
Output by Setting
1,748 lm, 863 lm, 207 lm
Setting Memory
Yes
Energy Class
E
Cable
N/A
Supply
230
IP Rating
IP20
Suitable Location
Indoor, dry rooms
Colour Temperature
2700K
Downloads
Instruction manual (PDF)
Frequently Asked
Do I need to buy a bulb?
No. The LED is built into the fitting, so there is nothing to buy and nothing to fit.
What happens when the LED fails?
The fitting is replaced rather than relamped. At 18W and normal domestic use that is many years away.
How do I change the brightness?
Switch off at the wall and straight back on. Each flick moves it to the next setting, at 100%, 50% and 10%. No dimmer is needed, and it remembers the level you leave it on.
Will it work on a dimmer?
It does not need one, and it should not be fitted to one. Brightness is controlled from the wall switch instead.
How bright is it at full?
At full it gives 1,748 lm, with the lower settings for evenings and a night light.
Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.
Créez votre lot



