Light Cable Cord Set E27 - Dark Wood

Description

Description
The Light Cable Cord Set E27 is a lampholder already made up on a length of flex, with a ceiling rose to cover the outlet. A short egg-shaped holder turned from dark wood, the grain showing in fine rings across its rounded top, split by a narrow line where the two halves screw together. A plain black flex runs straight into the top of it. There is no shade at all, so the lamp fitted below is the whole of what is seen, and the wood is sized to sit like a cap above it. The timber is a warm mid-brown, matt and unlacquered. It is meant to hang on its own or in a run of several at different drops.

It is what a bare shade or a glass hangs on, made up ready so the only work left is the ceiling outlet and the drop. It is a part rather than a finished fitting, so it is bought alongside whatever it is going to carry or connect to rather than on its own. That is the point of buying the pieces separately: the shade, the flex and the holder are each chosen on their own, and a run can be made up to a length and a drop that no finished pendant would give you.

The holder is E27 and takes up to 40W. It wires into a fixed outlet at a terminal block, which is work for a competent electrician. It is class II, double insulated, so it needs no earth, and it is rated IP20 for dry indoor rooms.

Specification

Finish
Dark Wood

Maximum Wattage
40W

Light Source
E27 lamp, not included

Supply
230V 50Hz

Insulation Class
Class II

IP Rating
IP20

Suitable Location
Indoor, dry rooms

Downloads
Instruction manual (PDF)

Frequently Asked
Which bulb does it take?
An E27 lamp up to 40W. Bulbs are supplied separately so you can choose the brightness and colour you want.

Can it be dimmed?
Yes, on a compatible dimmer, provided the lamp you fit is a dimmable one. The fitting has no dimmer of its own.

Does it need an electrician?
Yes. It wires into a fixed outlet at a terminal block.

Does it need an earth?
No. It is class II, double insulated, so it is wired live and neutral only.

Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.