Boogie Table Lamp 16cm - Dark Green

Description

Description
Boogie is a table lamp in dark green. A dark green half-sphere dome on a slim stem of the same colour, the dome a clean hemisphere with its rim cut square and left open. The stem drops straight from the centre of the dome to a flat round disc base, and a small turned brass cone sits where the stem meets the base, the only warm note on the lamp. The green is a deep matt teal on the dome, the stem and the base alike, so the form reads as one piece. The dome is wide relative to the stem, which gives the lamp a mushroom outline. Nothing is polished. It measures 16cm across and 25cm tall, in metal.

It is a lamp for a side table, a desk or a bedside, close enough to reach the switch from where you sit, and it lights the surface it stands on rather than the whole room. A pair either side of a bed or a sofa reads as deliberate where one alone reads as an afterthought, and two smaller lamps light a room more evenly than one large one. There is an inline switch on the flex, so it is reached at the fitting rather than by following the flex down.

It plugs into an ordinary socket, so it needs no electrician. It is class II, double insulated, so it needs no earth, and it is rated IP20 for dry indoor rooms.

Specification

Diameter
16cm

Height
25cm

Finish
Dark Green

Material
Metal

Maximum Wattage
25W

Light Source
G9 lamp, not included

Switch
Inline switch on the flex

Supply
230V

Insulation Class
Class II

IP Rating
IP20

Suitable Location
Indoor, dry rooms

Downloads
Instruction manual (PDF)

Frequently Asked
Which bulb does it take?
A G9 lamp up to 25W. Bulbs are supplied separately so you can choose the brightness and colour you want.

Can it be dimmed?
Yes, on a compatible dimmer, provided the lamp you fit is a dimmable one. The fitting has no dimmer of its own.

Does it need an electrician?
No. It comes on a flex with a moulded plug and goes into an ordinary socket.

Where is the switch?
There is inline switch on the flex.

Does it need an earth?
No. It is class II, double insulated, so it is wired live and neutral only.

Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.