Unity Single Phase Track L-Connector White - Surface Mounted

Description

Description
The Unity L-connector joins two sections of Maytoni's single-phase surface-mounted track system at a 90-degree angle, allowing track lighting runs to turn corners or form T-junctions. The connector is moulded from white plastic with internal copper contacts rated for 220-240V AC, and measures 70mm along each arm with a 17mm height above the ceiling surface.

Designed for residential and commercial track lighting installations where the layout needs to navigate around room corners, alcoves, or structural

features like beams and columns. The L-connector clips into the track channel on both sides, creating an electrical and mechanical joint without requiring external wiring. Once installed, the white finish matches Maytoni's white Unity track sections to maintain a continuous visual line across the ceiling.

The plastic body houses a three-contact internal bus bar that carries the live, neutral and earth connections through the 90-degree turn. Installation requires no tools beyond what's needed to mount the track itself — the connector slides into the track channel and locks with a quarter-turn or push-fit depending on the specific Unity track profile. The connector's low 17mm profile keeps the overall track system close to the ceiling, suitable for rooms with standard 2.4m ceiling heights.

Specification

Height
1.7cm

Length
7cm

Width
7cm

Finish
White

Construction
Plastic

Voltage
AC 220-240

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
Is this compatible with all single-phase track systems?

The Unity L-connector is designed specifically for Maytoni Unity single-phase track. It may not fit track systems from other manufacturers due to differences in rail profile, contact spacing and locking mechanism. Always match connectors to the same brand and system as your track.

Can I use this to create a T-junction?

This L-connector joins track at 90 degrees in an L-shape. For T-junctions or cross configurations, Maytoni produces separate T-connectors and X-connectors within the Unity range. Check the Track Connectors category for those alternatives.

How is it installed?

The connector slides into the open end of the track channel and locks into place with a quarter-turn or push-fit action, depending on the Unity track profile. No external wiring is required — the internal contacts carry power through the joint. Refer to the product manual linked above for detailed fitting instructions.

What other colours are available?

Maytoni Unity connectors are available in white, black and aluminium finishes to match the corresponding track colours. Use the site filters or search to find other finish options in stock.