Talvera P LED Downlight

Description

DescriptionThe Talvera P is a compact LED downlight that sits recessed into the ceiling, with a round cast aluminium body in satin nickel and a softly brushed, metallic look. It measures 7.5cm across and 5.5cm high, and its integrated LED sits deep inside a faceted reflector behind clear glass, giving a warm white light at 2700K. It is rated IP20, and that settles where it goes: indoors, in dry rooms, well away from water and steam.
Warm white at 2700K suits the rooms where people unwind, so we would set a run of these into a living room, a bedroom or a hallway ceiling, or group a few above a dining table, wherever a clean ceiling and an even glow matter more than a hanging shade. The satin nickel ring reads as a quiet metallic detail once it is fitted, and it sits comfortably beside brushed steel, chrome and grey or white walls. Because the light is recessed, low ceilings stay clear, and the room's furniture and colours keep the attention.
The cast aluminium body weighs just 0.12KG, and the LEDs are replaceable, so a worn light source can be renewed without changing the whole downlight. There is no switch on the light itself, as it is switched at the wall. As a wired-in light, it is installed by a qualified electrician, and the installation instructions are available as a download. Before ordering, check the ceiling void: it needs a recess depth of 6.5cm and a cut-out between 6.6 and 6.8cm wide.
Specification

Colour Temperature
2700K

Material
Cast aluminium

Colour
Satin Nickel

Shade Material
Glass

Shade Colour
Clear

IP Rating
IP20

Light Source
LED, integrated

Features
Replaceable LEDs

Height
5.5cm

Diameter
7.5cm

Recess Depth
6.5cm

Cut-Out
6.6–6.8cm

Weight
0.12KG

Protection Class
Class III

Operating Voltage
200mA

Switch
None (switched at the wall)

DownloadsInstallation Instructions (PDF)
Frequently AskedCan the Talvera P go in a bathroom?
No. It is rated IP20, which means it belongs in dry indoor rooms only, so we would keep it away from bathrooms, showers and any outdoor spot.
What size of cut-out does it need?
It needs a cut-out between 6.6 and 6.8cm wide and a recess depth of 6.5cm, so it is worth checking the space above the ceiling before ordering.
What colour is the light?
It gives a warm white light at 2700K, the soft, relaxed tone that suits living rooms, bedrooms and hallways in the evening.
Can the LEDs be replaced?
Yes. The LEDs are replaceable, so the light source can be renewed later without taking out the whole downlight.
What finish is the trim?
The colour is satin nickel on a cast aluminium body, a softly brushed silver tone that sits quietly against white and grey ceilings.
Does it have its own switch?
No, there is no switch on the downlight itself, so it is switched at the wall in the usual way.