IP65 4W LED Emergency Bulkhead (maintained/ non-maintained) - White

Description

Description
The Knightsbridge IP65 4W LED Emergency Bulkhead (maintained/ non-maintained) provides maintained / non-maintained / switched escape illumination on loss of mains, IP65 rated, with an integral rechargeable battery.

It provides escape illumination on loss of mains supply, operating in maintained or non-maintained mode as specified, with an integral battery that recharges automatically when power is restored. 3 Hour maintained or non-maintained use.

It is constructed from polycarbonate. It is certified to BS EN 60598-2-22 and IP65 rated.

Specification

Length
216 mm

Height
48 mm

Width
97 mm

Projection
48 mm

Construction
Polycarbonate

Finish
White

Class
II

IP Rating
IP65

Primary Voltage
230V 50Hz

Diffuser
Prismatic or Opal

Emergency Mode
Maintained / Non-maintained / Switched

Light Technology
SMD LED

Dimmable
No

Wattage
4W

Colour Temperature
6500K

Beam Angle
115°

Light Colour
Daylight

Lumens
175 lm

CRI
>70

Lamp Included
Yes

Warranty
3 years Including battery

Downloads
Product Specification Sheet

Frequently Asked
What is the difference between maintained and non-maintained emergency lighting?

A maintained fitting is lit during normal operation and stays lit on battery during a mains failure; a non-maintained fitting is off in normal use and only illuminates when the mains fails.

How often should emergency lighting be tested?

Emergency lighting should be given a short functional test monthly and a full-duration (typically 3-hour) discharge test annually, with results recorded, in line with BS 5266.

Is emergency lighting a legal requirement?

In most non-domestic premises emergency escape lighting is required to meet fire safety legislation and BS 5266; the specific provision follows a risk assessment.

How long does the battery last in a power cut?

These fittings provide the rated emergency duration (commonly 3 hours) from a fully charged battery before recharging when the mains is restored.