Atom Single Tilt Square Recessed Downlight - Black

Description

Description
The Atom is a 92mm square recessed downlight in black powder-coated aluminium with a 25° tilt mechanism that allows the lamp head to be angled towards specific areas after installation. The fitting accepts a single GU10 bulb (sold separately) up to 50W, housed in a gimbal ring that rotates within the square bezel to direct light where needed.

Designed for general ambient lighting and accent highlighting in residential and commercial interiors, the Atom suits living rooms, hallways, kitchens, retail spaces and offices where adjustable directional light is needed without exposed track systems. The recessed design sits flush with the ceiling plane once installed, requiring a ceiling void depth of at least 25mm above the plasterboard line. The tilt mechanism allows light to be directed onto feature walls, artwork, worktops or circulation paths after the fitting is wired in.

The black powder-coated finish on the aluminium bezel provides a matt surface that minimises glare under daylight and integrates cleanly into dark ceilings or creates defined geometric contrast against white plaster. The IP20 rating limits the fitting to dry indoor environments — it is not suitable for bathrooms, wet rooms or outdoor locations. The 50W maximum load handles standard GU10 halogen or LED bulbs; most users pair this fitting with 4-7W LED GU10 bulbs in the 2700K-4000K range depending on the application.

Specification

Height
2.5cm

Length
9.2cm

Width
9.2cm

Finish
Black

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Bulb Base
GU10

Wattage
50

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What bulb does the Atom take?

The fitting accepts a single GU10 bulb up to 50W. Bulbs are sold separately. Most installations use a 4-7W LED GU10 bulb in warm white (2700K-3000K) for ambient lighting or cool white (4000K) for task lighting in kitchens and offices.

How much ceiling void depth is required?

The fitting requires a minimum 25mm ceiling void depth above the plasterboard to accommodate the lamp holder and wiring. The 92mm square bezel sits flush with the ceiling surface once installed.

Can the light direction be adjusted after installation?

Yes. The 25° tilt mechanism allows the lamp head to be angled within a cone of approximately 25° from vertical after the fitting is wired in, directing light onto walls, surfaces or

features without needing to reposition the fitting itself.

Is this suitable for bathrooms?

No. The IP20 rating limits the Atom to dry indoor environments. For bathrooms, wet rooms or outdoor locations, a fitting with a minimum IP44 or IP65 rating is required.