200W LED Driver IP54 - White

Description

DescriptionWe stock this 200W LED driver as the power supply for a track lighting run. It sits in a white powder-coated aluminium extrusion rated to IP54, and converts an AC 180-265V mains input to the low-voltage DC output the track needs. With 200W on tap it has the headroom to power a run of LED track heads from a single supply.

We reach for a driver like this on commercial track schemes in retail, gallery, museum and hospitality settings, mounted within the track rail or fixed alongside the run. The IP54 rating shrugs off dust and water splashes, so it also suits covered outdoor spots such as shop canopies and covered walkways where the odd bit of rain reaches it. Mounting brackets at each end let you fix it to a ceiling, a wall or inside the track housing.

It takes a wide AC 180-265V input at 50Hz, so it stays stable across UK mains fluctuations without extra regulation. The housing is aluminium in white and wants a little space around it to shed heat in use. It is not dimmable and gives fixed output only, so any dimming has to be handled downstream of the driver.

Specification

Wattage
200W

IP Rating
IP54

Input Voltage
AC 180-265V 50Hz

Dimmable
No

Material
Aluminium

Finish
White

Downloads
Product manual

Frequently AskedWhat is this driver for?

It is the power supply for an LED track lighting run, converting AC 180-265V mains to the low-voltage DC output the track needs, with 200W of capacity for a run of track heads.

Can I use it outdoors?

It is rated IP54, so it resists dust and water splashes and suits covered outdoor spots such as canopies and walkways. It is not made for full exposure to driving rain or standing water.

Is it dimmable?

No. It gives fixed output only, so any dimming has to be handled by separate control downstream of the driver.

How is it mounted?

It has mounting brackets at each end for fixing to a ceiling or wall, or within the track housing. Leave a little space around it so it can shed heat in use.