Larkin 2 Light Lantern Pendant - Brushed Nickel

Description

Description
The Kichler Larkin is a 2-light lantern pendant built around an open cage frame in brushed nickel, with four arched corner posts rising to a domed cap and a matching square base. Two E14 candle bulb fittings sit exposed inside the cage on brushed nickel stems, with the bulbs visible through all four sides of the 203mm-wide frame.

Designed for entrance halls, kitchen islands and stairwells where a vertical pendant suits the ceiling height, the Larkin pairs well with ceilings of 2.4m or higher. The 1829mm chain allows the drop to be adjusted between 432mm and 2261mm on installation, letting the pendant be set 700-900mm above a worktop or sideboard depending on room proportions. The brushed nickel finish softens reflections and pairs comfortably with stainless steel appliances, chrome taps, and cooler-toned interiors.

The open cage structure means light from the bulbs radiates in all directions rather than being directed downwards, making this a better choice for ambient or feature lighting than task lighting. The arched corner posts and domed cap give the fitting a traditional lantern profile that works in both classical and transitional interiors. At 375mm tall and 203mm wide the Larkin sits comfortably in most domestic hallways without dominating the space, and the exposed bulbs mean choosing a warm-white filament or LED candle bulb contributes directly to the overall appearance.

Specification

Fitting Height
375mm

Diameter
203mm

Minimum Drop
432mm

Maximum Drop
2261mm

Maximum Wattage
60W

Socket
E14

Bulb(s) Included
No

Guarantee
2 Year Guarantee

Chain/Wire/Cord Length
1829mm

Height Adjustable
On Installation

Frequently Asked
What bulbs does the Larkin take?

The Larkin takes two E14 small Edison screw candle bulbs up to 60W each. Bulbs are sold separately. Most users pair this with 4-6W LED candle bulbs in warm white (2700K-3000K) to match the traditional lantern profile.

What ceiling height is needed?

The adjustable 432-2261mm drop works in rooms with ceiling heights of 2.4m or above. For entrance halls or stairwells with higher ceilings the full chain length allows the pendant to be positioned well below the ceiling rose to fill vertical space.

Is the Larkin dimmable?

Dimmer compatibility depends on the bulbs you choose. LED candle bulbs marked as dimmable will work with most trailing-edge dimmers. Non-dimmable LED bulbs will not dim and may flicker or fail if used with a dimmer switch.

Can the chain be shortened?

Yes. The 1829mm chain can be shortened during installation by removing links to achieve the desired drop between 432mm and 2261mm. The removed chain links can be stored in case the fitting is relocated to a room with a higher ceiling.