Pyleford Hammered Pendant - Brass

Description

DescriptionThe Pyleford pendant is a narrow hammered brass shade on an adjustable suspension, measuring 195mm across the shade with an overall height that runs from 450mm to 1525mm. That is a wide range of adjustment, so the same ceiling light can hang low over a counter or high in a hallway. One E27 lampholder takes a 10W LED bulb, and the pendant is dimmable when paired with dimmable bulbs and a matched dimmer switch. The metal shade directs light downwards instead of glowing all over, which makes it a good task light. It weighs 2.0kg and is a Class 1 fitting, so it needs an earthed supply.
A 195mm shade is small enough to hang in a row, and we would put three or four of these above a kitchen island or a breakfast bar with even gaps between them. Singly it works over a side table, in a small hallway, or above a stairwell landing. Because the light is directed, it puts a clear pool on the surface below rather than filling the room, so pair it with other lighting if the room has no other source. The hammered brass keeps the look warm and handworked rather than industrial.
The shade, suspension and ceiling plate are metal in a hammered brass finish, with dimples that break up reflections and hide the small marks that plain brass shows. Dust with a dry soft cloth and lift any marks with a barely damp cloth, drying straight away and keeping sprays and creams away from the brass. It is rated IP20 for dry indoor rooms, and being Class 1 it must be earthed at the ceiling. There is a matching Pyleford wall light and a wider hammered disc pendant in the same range if you want the finish carried across a room.
Specification

Bulb Fitting
1 x E27

Maximum Wattage
10W (10W per lamp)

Dimmable
Yes

IP Rating
IP20

Class
Class 1 (earthed)

Diameter
195mm

Height
450-1525mm

Weight
2.0kg

Materials
Metal

Finish
Brass

Warranty
2 Year

DownloadsInstallation Instructions (PDF)
Frequently AskedHow big is the shade?
195mm across, with an overall height adjustable from 450mm to 1525mm.
What is it made from?
Metal throughout, in a hammered brass finish, with no glass diffuser.
Which bulb does it take?
One E27 screw cap bulb at 10W in LED.
Can I hang a row of them over an island?
Yes. At 195mm across they suit a row of three or four with even spacing.
Does it need an earth?
Yes. This is a Class 1 fitting and requires an earthed supply.
Is it dimmable?
Yes, with dimmable bulbs and a dimmer switch rated to work with them.