Wrenfield Large 2 Light Tiffany Flush Ceiling Light - Multicoloured

Description

DescriptionThe Wrenfield large flush ceiling light sits unusually close to the ceiling, with a projection of just 150mm under a 450mm shade of Tiffany-style leaded glass. Multicoloured pieces are cut one at a time and joined with soldered seams over a metal frame, so the pattern is held in lead rather than printed on. Two lamp holders behind the glass each take an E27 GLS bulb of up to 60W, and bulbs are supplied separately. The fitting weighs 2.7kg and dims with dimmable bulbs on a compatible dimmer switch.
A shallow flush fitting is the answer to rooms where headroom is tight and a semi-flush or pendant would be in the way: a low cottage ceiling, a hallway, a landing, a loft bedroom or the top of a staircase. It gives an even wash of light across a room instead of a pool in one place, which makes it a sensible main light rather than a decorative extra. The leaded pattern suits older houses and adds colour to plain plaster, and at 450mm across it reads as the main event on a small ceiling. Rated IP20, it is for dry indoor rooms.
The shade is soldered leaded glass on a metal gallery and the fitting is wired as Class 1, so it needs an earth and a qualified electrician. Dust the glass with a dry soft cloth or a soft brush, and lift marks with a barely damp cloth before drying at once, keeping solvents, polishes and abrasive creams off the solder lines. Let bulbs cool before changing them. Because the glass carries so much colour, we would keep the rest of the room simple and let the ceiling do the talking.
Specification

Bulb Fitting
2 x E27

Maximum Wattage
120W (60W per lamp)

Dimmable
Yes

IP Rating
IP20

Class
Class 1 (earthed)

Projection
150mm

Diameter
450mm

Weight
2.7kg

Materials
Glass & Metal

Finish
Multicoloured

Warranty
2 Year

Frequently AskedHow much does it hang down?
Only 150mm, under a shade 450mm in diameter, which is one of the shallowest projections in this style of fitting.
What is the shade made from?
Multicoloured Tiffany-style leaded glass on a metal frame. Each piece is cut individually and joined by soldered seams.
Which bulbs does it take?
Two E27 GLS bulbs of up to 60W each, supplied separately. Warm white gives the truest colour through leaded glass.
Can it be dimmed?
Yes, with dimmable bulbs and a compatible dimmer switch. Bulbs not marked dimmable will flicker or hum.
How should I clean it?
Dust with a dry soft cloth or soft brush, then wipe marks with a barely damp cloth and dry immediately. No solvents or abrasive creams.
Is it suitable for a bathroom?
No. It is IP20 rated for dry indoor rooms, so choose an IP rated fitting for bathrooms and shower rooms.