Fremora LED Downlight 10cm - White

Description

DescriptionThe Fremora is a slim, round LED downlight in white, 10cm across, with an aluminium body and a white plastic shade across its flat face. The LED is integrated, drawing 5.5W and giving 750lm at 3000K, a warm light that sits comfortably in a home. There is no bulb to buy or change. It carries two IP ratings, IP65 and IP20, and we recommend it for dry rooms indoors.
Downlights look their best in a group, and this one suits hallways, landings, kitchens, living rooms and bedrooms where a flat, tidy ceiling matters more than a hanging shade. Set in a line along a corridor or spaced across a kitchen ceiling, a run of them gives general light without anything dropping into the room. The plain white face blends with a white ceiling, so when the lights are off they barely catch the eye. It is a sensible choice for low ceilings where headroom counts, and for anyone planning a fresh, uncluttered look throughout a room.
Two things decide whether it suits your ceiling: it needs a 6.8cm cut-out and 3cm of recess depth, so it works where there is little room behind the ceiling. Orange spring clips at the back hold it firmly in the ceiling. It runs on 220-240V, 50/60Hz mains and is not dimmable, so it is switched from an ordinary wall switch rather than a dimmer. As a wired-in mains light, it should be installed by a qualified electrician, and the installation instructions come as a download. Packed, it weighs 0.205KG. Before you order, measure any existing holes, since the 6.8cm cut-out settles whether it drops straight into an old opening.
Specification

Diameter
10cm

Body Material
Aluminium

Body Colour
White

Shade Material
Plastic

Shade Colour
White

Light Source
LED, integrated

Wattage
5.5W

Lumens
750lm

Colour Temperature
3000K

Dimmable
No

Switch
None (switched at the wall)

IP Rating
IP65, IP20

Protection Class
Class II

Voltage
220-240V, 50/60Hz

Energy Class
E

Recess Depth
3cm

Cut-Out
6.8cm

Weight (packed)
0.205KG

DownloadsInstallation Instructions (PDF)
Frequently AskedCan I put the Fremora downlight in a bathroom?
It carries two IP ratings, IP65 and IP20. We recommend it for dry rooms indoors, so we would not place it in a bathroom or outdoors.
What size hole does this downlight need?
It needs a cut-out of 6.8cm and a recess depth of 3cm, and the white face is 10cm across.
How bright is the light?
The integrated LED gives 750lm from 5.5W at 3000K, a warm light that sits comfortably in living rooms, bedrooms and hallways.
Can the downlight be dimmed?
No, it is not dimmable. It is switched from an ordinary wall switch, so pair it with a standard switch rather than a dimmer.
Does it need a separate bulb?
No, the LED is integrated into the downlight, so there is no separate bulb to buy, fit or replace.
What material is the body?
The body is aluminium in white, and the shade across the face is white plastic, giving a clean, plain finish.