3-Phase Track Trinity Joint Amplifier - Black

Description

Description
The Trinity joint amplifier is an aluminium connector piece for Maytoni's Trinity 3-phase track system, designed to join two track sections while maintaining continuous power distribution across all three phases. The 18cm-long black aluminium body slides into the track channel ends and locks the sections together without visible fixings or cable interruption.

Used in commercial, hospitality and residential installations where track runs exceed the length of a single section, the joint amplifier ensures power flows unbroken from one track to the next. This allows spotlights and pendant adaptors positioned near the join to draw power without dropout or phase imbalance. The component suits both surface-mounted track fixed directly to ceilings and suspended track hung on cables or rods.

The 2cm-high profile matches the Trinity track body exactly, so the join sits flush once assembled. The black anodised aluminium finish matches the standard Trinity track colour, making the connector nearly invisible from ground level in typical ceiling installations. Each joint amplifier weighs approximately 120g and requires no separate wiring or electrical work — it clips into place mechanically and the internal contacts align automatically when the track sections are pushed together.

Specification

Height
2cm

Length
18cm

Width
3.2cm

Finish
Black

Construction
Aluminium

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What does a joint amplifier do in a track lighting system?

It joins two track sections mechanically while maintaining electrical continuity across all three power phases, allowing the track run to extend beyond the length of a single section without interrupting power to lights positioned near the join.

Is this compatible with other track systems?

No. The Trinity joint amplifier is engineered specifically for Maytoni's Trinity 3-phase track system and will not fit other manufacturers' track profiles or proprietary connector designs.

Does it require separate wiring?

No. The joint amplifier clips into place mechanically and the internal contacts align automatically when track sections are pushed together. No additional electrical work is needed beyond the initial track power supply connection.

Can it be used with suspended track installations?

Yes. The joint amplifier works with both surface-mounted track fixed directly to ceilings and suspended track hung on cables or rods, provided the track sections are aligned correctly during assembly.