Mini 5 Light Round Flush Ceiling Light - Silver

Description

Description
The Mini is a 500mm diameter flush ceiling light with a silver aluminium drum frame and an opal white acrylic diffuser that seats five E27 bulbs behind it. The 200mm overall height from ceiling to diffuser base means the fitting sits close to the ceiling, making it suitable for rooms with ceiling heights below 2.4m where a pendant would hang too low or visually dominate.

Designed for bedrooms, hallways, landing areas and living rooms with standard UK ceiling heights, the Mini provides ambient light distributed evenly across the room by the opal diffuser rather than directing light in one spot. The five E27 sockets allow bulb selection to match room use, warm white 2700K LEDs for bedrooms, neutral 3000K for hallways, or higher lumen outputs for larger living spaces. Bulbs are sold separately and the fitting is dimmable when paired with dimmable bulbs and a compatible dimmer switch.

The silver aluminium frame provides a cooler metallic accent compared to brass or bronze alternatives, pairing with contemporary interiors that use greys, whites and cooler-toned timber finishes. The 500mm diameter suits rooms from approximately 12m² upwards, though light distribution depends on bulb choice and ceiling reflectance. At 3.2kg the fitting requires secure fixing to a ceiling joist or reinforced plasterboard anchor rather than a standard plasterboard plug.
Specification

Colour Finish 1
Silver

Colour Finish 2
Opal White

Shade Colour
Opal White

Diameter
500mm

Height
200mm

Number Of Bulbs
5

Lamp Socket
E27

Power Consumption
Dependent On Lamps Used

Voltage
220-240V~50/60Hz

Dimmable
Yes – Suitable Lamps & Dimmer Required

Weight
3.2KG

Warranty
1 Year

Frequently Asked
What size room does the Mini suit?

The 500mm diameter and five-bulb configuration suits rooms from approximately 12m² upwards. Smaller rooms may find the fitting visually dominant, while rooms above 20m² may need higher-lumen bulbs or a second light source depending on ceiling height and surface reflectance.

What bulbs does it take?

The fitting takes five E27 (Edison screw) bulbs, sold separately. We suggest pairing this with 8-10W LED bulbs in 2700K-3000K for residential use. The maximum wattage per socket depends on the bulb type. Check manufacturer guidance to avoid exceeding the fitting's heat tolerance.

Is it suitable for low ceilings?

Yes. The 200mm height means the fitting projects only 200mm from the ceiling surface, making it appropriate for ceiling heights from 2.2m upwards where pendant lights would hang into head clearance zones.

Can it be dimmed?

Yes, when paired with dimmable E27 bulbs and a compatible trailing-edge or leading-edge dimmer switch. The fitting itself does not include dimming circuitry. Dimmer compatibility depends entirely on the bulbs chosen.