Malibu 2 Light Flush Ceiling Light - Polished Chrome

Description

Description
The Malibu is a 335mm flush ceiling light with an opal etched glass dome shade set into a stepped polished chrome frame. The fitting takes two E27 bulbs (sold separately) housed inside the glass shade, which diffuses the light evenly across the ceiling plane and downwards into the room. The polished chrome frame consists of a 335mm diameter ceiling plate with a raised central boss and a lower chrome ring that secures the glass dome.

Designed for bathrooms, hallways, landings and bedrooms with ceiling heights of 2.2-2.4m, the Malibu carries an IP44 rating, meaning it is protected against splashing water from any direction. This makes it suitable for bathroom zone 2 (outside the immediate shower or bath enclosure). The 156mm overall height includes the ceiling plate and the glass dome, so the fitting projects approximately 150mm below the ceiling once installed on a standard UK ceiling rose.

The opal etched glass is a solid white translucent finish that softens the light output and hides the bulb filaments or LED elements from view, preventing glare when looking up at the ceiling. The polished chrome finish provides high reflectivity, bouncing ambient light around the room and pairing with chrome taps, towel rails and other bathroom fittings. The stepped frame design gives the fitting a defined architectural profile rather than a simple flat disc.

Specification

Fitting Height
156mm

Diameter
335mm

Width
335mm

Maximum Wattage
60W

Socket
E27

Bulb(s) Included
No

IP Rating
IP44

Guarantee
2 Year Guarantee

Height Adjustable
No

Frequently Asked
Can this be used in a bathroom?

Yes. The Malibu carries an IP44 rating, which means it is protected against splashing water from any direction. It can be installed in bathroom zone 2 (outside the immediate shower or bath enclosure, typically 60cm or more from a water source).

What bulbs does it take?

The fitting takes two E27 (Edison screw) bulbs up to 60W each. Bulbs are sold separately. Most users pair this with warm-white LED bulbs between 6-10W and 2700K-3000K for bathroom and hallway use.

Is it suitable for low ceilings?

Yes. The 156mm overall projection suits rooms with ceiling heights of 2.2m or above. The flush-mount design keeps the fitting close to the ceiling, making it suitable for rooms where a pendant would hang too low or obstruct headroom.

Is the glass shade replaceable?

Yes. The opal etched glass dome is held in place by the lower chrome ring, which unscrews to allow the glass to be removed for cleaning or replacement. Replacement glass can be sourced from Feiss or via Niori.