Jules 2 Light Wall Light - Brushed Nickel

Description

Description
The Jules is a 2-light wall light built around a vertical arrangement of six oval metal rings in brushed nickel, with a rectangular white fabric shade suspended between the third and fourth rings. The repeating oval frame creates a symmetrical pattern above and below the shade, with two E14 candle bulbs inside the shade housing providing diffused light through the fabric.

Designed for hallways, bedroom walls flanking a bed, and living room feature walls where vertical proportion matters, the 515mm height suits walls with 2.4m or higher ceilings. The 98mm projection from the wall gives enough depth for the shade to sit clear of the ovals without overwhelming the wall plane. The dual bulbs provide enough light output for ambient room lighting or bedside reading when paired with 6-8W LED candles.

The brushed nickel finish on the metal frame gives a soft grey-toned surface that works with both warm and cool colour palettes, and the low-sheen brushing reduces reflections under daylight. The white fabric shade conceals the bulbs while diffusing light evenly upward and downward through the top and bottom of the shade. The metal frame is formed from stamped and welded oval sections, giving structural depth to each ring rather than a flat silhouette.

Specification

Fitting Height
515mm

Diameter
218mm

Width
218mm

Projection/Depth
98mm

Minimum Drop
–

Maximum Drop
–

Maximum Wattage
40W

Socket
E14

Bulb(s) Included
No

Guarantee
2 Year Guarantee

Frequently Asked
What bulbs does it take?

The Jules takes two E14 small Edison screw candle bulbs up to 40W each. Bulbs are sold separately. Most users pair this with warm-white LED candles between 4-6W and 2700K for bedroom or hallway use.

Can it be used in a bathroom?

The Jules carries no IP rating and is designed for dry interior locations only. It is not suitable for bathrooms or other damp environments.

How is it fitted to the wall?

The light mounts on a standard wall-mounted backplate with a central fixing point. The backplate is wired to mains supply before the decorative frame and shade are attached. Installation should be carried out by a qualified electrician.

Is the shade removable for cleaning?

Yes. The fabric shade typically detaches from the frame for dusting or spot-cleaning. Avoid soaking the fabric or using harsh cleaners — a dry microfibre cloth or very lightly damp cloth is sufficient for most marks.