Fulton 2 Light Wall Light - Bronze & Brass

Description

Description
The Fulton is a 566mm tall wall light built around an open tapered cage frame that holds two E14 bulbs vertically aligned within a bronze outer frame and brass inner panel. The cage has no glass panels, so the bulbs themselves become the primary light source and visual feature, casting direct light forwards and sideways through the open metalwork.

Designed for hallways, staircases, living room accent walls and bedroom feature walls, the Fulton works where vertical wall space allows its 566mm height to be used without obstruction. The 125mm projection from the wall keeps the fitting clear of picture rails and door frames while giving enough depth for the cage structure to create shadow patterns on the wall behind. The open design means light spreads freely in all directions rather than being controlled by a shade or diffuser.

The bronze outer frame contrasts with the warm brass inner panel to create a two-tone finish that suits both period and contemporary settings. The tapered cage narrows from 190mm width at the centre to approximately 140mm at top and bottom, giving the fitting a vertical emphasis that works well in narrow wall positions. The metal frame weighs approximately 1.2kg and mounts to a standard UK wall plate behind the bronze backplate.

Specification

Fitting Height
566mm

Width
190mm

Projection/Depth
125mm

Maximum Wattage
60W

Socket
E14

Bulb(s) Included
No

Guarantee
2 Year Guarantee

Frequently Asked
What bulbs does the Fulton take?

The fitting takes two E14 (small Edison screw) bulbs up to 60W each. Bulbs are sold separately. Most users pair this with warm-white LED candle bulbs between 4-6W and 2700K for a soft ambient glow that complements the bronze and brass finish.

Can it be used in bathrooms?

The Fulton carries no IP rating and is designed for dry indoor use only. It is not suitable for bathrooms or any area where it may be exposed to moisture or steam.

What ceiling height suits the 566mm vertical fitting?

The Fulton works best on walls in rooms with ceiling heights of 2.4m or above, where the 566mm vertical dimension can be appreciated. In lower rooms the fitting may feel out of proportion unless positioned in a wider alcove or stairwell.

Is the brass finish lacquered or will it tarnish?

Hinkley brass finishes are typically lacquered to prevent tarnishing and maintain the warm brass tone over time. Wipe with a dry microfibre cloth to remove dust — avoid abrasive cleaners that may damage the lacquer.