Hoop Twin Fixed Rectangular Recessed Downlight - White

Description

Description
The Hoop Twin is a rectangular recessed downlight fitting two GX53 bulbs within a 220mm x 110mm white frame constructed from aluminium and plastic. The fitting sits flush with the ceiling once installed, with a 45mm depth that fits into most standard ceiling voids without requiring additional structural work. Each of the two GX53 sockets accepts bulbs up to 15W (sold separately), allowing the user to choose the colour temperature and brightness that suits the room.

Designed for kitchens, hallways and commercial spaces needing broader coverage than a single downlight provides, the twin configuration spreads light across a wider area with fewer ceiling cut-outs. The rectangular footprint works well above kitchen worktops and office desks where linear light distribution is more useful than a circular spread. The IP20 rating limits the fitting to dry indoor locations.

The white finish on the aluminium frame sits flush with the ceiling surface and disappears into white or light-coloured ceilings, leaving the two circular apertures as the only visible elements. The fixed design means the light direction cannot be adjusted once installed, so the fitting is best suited to positions where vertical downward light is needed rather than angled accent lighting. The combination of aluminium construction and plastic trim ring keeps the fitting lightweight while providing structural rigidity for the cut-out.

Specification

Height
4.5cm

Length
22cm

Width
11cm

Finish
White

Construction
Aluminium & Plastic

IP Rating
IP20

Voltage
AC 220-240

Bulb Base
GX53

Wattage
15

Warranty
2 Year Guarantee

Frequently Asked
What bulbs does it take?

The fitting takes two GX53 bulbs up to 15W each. GX53 is a twist-and-lock base commonly used in low-profile recessed fittings. Bulbs are sold separately. Most users pair this with warm white LED GX53 bulbs between 7-11W and 2700K-3000K.

Can it be used in bathrooms?

No. It is rated IP20, so it is for dry rooms only.

What ceiling void depth is needed?

The fitting requires a minimum 45mm ceiling void depth above the plasterboard for the body to recess fully. Most modern suspended ceilings and timber joist ceilings provide adequate depth, but older solid ceilings may not accommodate recessed fittings without modification.

Is the light direction adjustable?

No. The Hoop Twin is a fixed downlight, meaning the light direction cannot be adjusted after installation. The bulbs emit light vertically downward from the ceiling surface.