Artisan Single Spotlight - White

Description

Description
The Artisan is a surface-mounted single spotlight with a cylindrical white aluminium housing that tilts on a ceiling-mounted pivot ring. The spotlight takes a single GU10 bulb (sold separately) and rotates through approximately 350° horizontally and tilts 90° vertically, allowing directed light onto walls, worktops, artwork or architectural

features. The exterior surface carries a fine diamond-pattern texture that diffuses reflections and gives the white finish a matt, technical appearance rather than a gloss.

Designed for kitchens, hallways, living rooms and retail environments where adjustable accent or task lighting is needed without a track system, the Artisan mounts directly to the ceiling via the pivot ring and connects to standard UK mains wiring. The 54mm diameter and 146mm projection suit typical 2.4m ceiling heights without the fitting appearing too large or intrusive. The interior aperture is finished in black, reducing internal reflections and giving a defined edge to the light beam when the fitting is angled.

The aluminium construction keeps the weight low at approximately 200g, making installation straightforward on standard plasterboard ceilings with appropriate fixings. The IP20 rating limits the fitting to dry indoor use — it is not rated for bathrooms, outdoor applications or environments with moisture exposure. The white finish pairs with both cool-toned contemporary interiors and warmer neutrals, and the textured surface hides fingerprints and minor marks better than smooth gloss finishes.

Specification

Height
14.6cm

Diameter
5.4cm

Finish
White

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Bulb Base
GU10

Wattage
10

Warranty
2 Year Guarantee

Frequently Asked
What bulb does the Artisan take?

The spotlight takes a single GU10 bulb up to 10W. Bulbs are sold separately. Most users choose a warm-white LED GU10 between 5-7W and 2700K-3000K for accent lighting, or a cooler 4000K for task lighting over kitchen worktops.

Can the spotlight be angled after installation?

Yes. The cylindrical housing rotates horizontally through approximately 350° and tilts vertically through 90°, allowing the light beam to be directed onto walls, surfaces or features after the fitting is wired and mounted.

Is it suitable for bathrooms?

No. It is rated IP20, so it is for dry rooms only. It is not rated for any location with moisture exposure.

What ceiling fixing is needed?

The pivot ring mounts to the ceiling via two fixing points. On plasterboard ceilings, use cavity fixings rated for the combined weight of the fitting and bulb (approximately 250g total). On solid ceilings, standard screws and wall plugs are sufficient.